0
To know for sure, You need to remove the big metal plate on the rear end housing and count the # of teeth on the BIG round gear / Ring gear. Then count the teeth on the small round gear / pinion gear that sets deep in the housing and runs on the big gear. Then divide the small # into the high # and that will be you gear ratio.
What else can I help you with?
What is the rear gear ratio in a 1989 Chevy Cheyenne?
The rear gear ratio of a 1989 Chevy Cheyenne truck is between 2.73 and 4.56. This is the number of times the drive shaft rotates in relation to the tires.
What is the rear end ratio in a 78 Chevy 1 ton with the granny gear 4 speed?
The rear end ratio in a 1978 Chevy 1-ton truck with a granny gear 4-speed transmission typically varies based on the specific configuration and options chosen by the original owner. Common ratios for this model include 3.73, 4.10, and 4.56. To determine the exact rear end ratio for a specific truck, you may need to check the build sheet, the VIN, or inspect the rear differential for markings.
Gear ratio 1988 Chevy k 1500?
Is a rear end in a 88 4x4 Chevy truck the same as the front in gears of a 93 Chevy 4x4
I have a 1978 Chevy truck half ton four wheel drive with 308 gear ratio front and back the rear end went out so i put a rear end out off a 1982 Chevy truck half ton four wheel can i put 308 gears in?
Yes you can, But the 308 ring and pinion will have to be for the 1982 carrier that's in it now.
What size rear end in 2009 Chevy truck?
If your asking about the gear ratio, Then write the VIN # down and call a Chevy dealer and ask for parts. Then ask the parts man if he'll tell you the gear ratio and that you have the VIN# on you truck. He'll tell you what the gear ratio is from the factory.
Will rear end from 1999 Chevy pickup fit a 1996 Chevy pickup?
It depends on the gear ratio of the rear ends. You can find this out in the glove compartment of your truck. It should tell you there. Hope this helps you out.
Will 1965 Chevy truck 12 bolt rear end fit in a 1987 Chevy truck with a 10 bolt rear end?
will a 1988 rear end fit under a 1965 chevy truck
Swap 52 Chevy truck rear end with 54 Chevy powerglide rear end?
the '52 should have a 4.11:1 ratio in it currently. If you change it out for the '54 rear end you will have a 3.55:1 ratio. As far as changing it, it should bolt right up. Do you have a more specific question?
Will a 1987 Chevy truck 10 bolt rear end fit in a 1989 Chevy truck with a 10 bolt rear end?
Yes it should
How do you identify the rear axle gear ratio on a Chevy truck using the VIN number?
That is done through the dealers computer system. There isn't one specific digit in the vin for the axle ratio.
How do you identify rear axle Chevy truck?
If you are trying to identify the axle ratio and/or if it has a locking rear differential and you have access to the original truck, there is a build sheet summary usually in the form of a decal. This decal would be located on the inside of the glove box lid.
What are the dimensions of a Chevy Silverado rear window?
What are the dimensions of 05 Chevy truck
