if it's a six cylinder au falcon, the belt should tension itself because the six cylider engine has an automatic tensioner.
No, Have a look at the way the belt is. You cant just get a shorter belt and bypass the AC compressor as the belt would foul on the tensioner. u need a AC bypass pulley and bracket, and so far, i can only find these genuine
Ford AU Falcon was created in 1998.
The XF falcon bullbar will fit a AU falcon with a little bit of fabrication.
Tension pulleyAs you look at the motor from the front - on the top right had side of the belt (opposite side to the power steer) you will notice a small pulley that has a bolt head only on it - This is the pretentioner pulley, you will need to get a shifter or similar to grip this, pull down then carefully while holding the tension, remove belt. Refitting belt is opposite to this how do I instal the belt
You need an AU Falcon towbar.
no
Only the AU IRS version.
ford falcon au's take 5x7 speakers front and back
au falcon dosent have a distrutor cap they run 6 pin coil pack
pressure plate torque settings for ford falcon au 6 cylinder
ILLEGALY
If there is a flashing S on your Ford Falcon AU on the dashboard that is a warning. The S on this model means that your vehicle needs to be serviced.