0
,
If it's a new belt that you are trying to put in, make sure it is routed properly. Also match it up with your old belt and make sure it isn't longer than the old one.
If the belt was already in your car and it's now loose, check to make sure the belt is not damaged. If the belt looks good, you may need a new tensioner.
Good luck
What else can I help you with?
How to Tighten belt on grand marquis?
Engine used a serpentine belt, with a spring-loaded tensioner. You cannot tighten the belt. If the belt is slipping, either one of the driven components is going bad and dragging the belt, or the tensioner is bad.
How do you install a serpentine belt on a 1994 Z71 305 Chevy engine?
Put the serpentine belt on to the pulleys of your 1994 Chevy engine. Tighten a serpentine belt with the tensioner pulley.
How do you tighten the serpentine belt on a 1997 Plymouth Voyager with a 3 liter engine?
The belt is self adjusted by way of a tensioner.
How do you change drive belts on 1967 Cadillac deville?
CHANGING ALTENATOR BELT: 1. loosen compressor bolts push towards engine to remove compressor belt 2. loosen power steering bolts and push pump towards engine to get slack to remove belt. 3. loosen altenator bolts pus it towards motor to get slack and remove belt. 4. put new belt on push altenator away from motor to tighten slack in belt and tighten bolts 5. push power steering pump away from motor to tighten belt and tighten bolts 6. push compressor away from motor to tighten belt and tighten bolts. REMOVE FAN BELT: Do steps 1,2,5 and 6 REMOVE COMPRESSOR BELT: Do steps 1and 6
How do you tighten the alternator belt on a 240sx?
To tighten the alternator best on a 240sx, loosen the bolt on the alternator on the drivers side. Pull on the alternator away from the engine to adjust the belt. When it has no more than a quarter inch of give, tighten the bolt to finish.
How do you tighten belts on 1999 Mazda 626 2.0 engine?
To tighten the serpentine belt on a 1999 Mazda 626 with a 2.0-liter engine, locate the tensioner pulley. Use a wrench or socket to rotate the tensioner counterclockwise, which will relieve tension on the belt. Once the belt is properly positioned, release the tensioner to apply tension to the belt. Make sure the belt is aligned correctly on all pulleys before starting the engine.
How do you tighten a fan belt on a Renault laguna?
To tighten the fan belt on a Renault Laguna, first, locate the belt tensioner. Using a suitable wrench, turn the tensioner clockwise to relieve tension on the belt. Once the belt is loose, adjust the position of the alternator or the component the belt drives to achieve the correct tension. Finally, tighten the tensioner back into place and ensure the belt is properly aligned before starting the engine.
How do you tighten the tension on the alternator belt on a 99 montero sport 3.0 liter 4 wd?
Go under the engine and follow the belt down to the under side of the engine. You will see a metric size 14 bolt just to the left that runs up to the tensioner. Turn clockwise to tighten but don't over tighten.
How do you tighten fan belt on Mitsubishi L200?
how do you tighten fan belt on l200
How do you tighten the serpentine belt on a 1997 Nissan Pathfinder with a 3.3L V6 engine?
Tension is accomplished with a belt tensioner, it is probably defective and needs replaced.
How do you tighten the fan belt on a peugeot 205?
just in front of the altenator, there is a 10mm bolt, tighten that and it will tighten the fan belt
What is the constant squeaking noise coming from the front part of the car?
the belt on the engine is loose, so you want to see if you can tighten it or get a new belt . i hope this helps
