0
If you have had the dist. out and have it back in now and the engine will start and run with no check engine light on then you are done, the computer will adjust the timing itself. If engine is running and the light is on , then you will have to get a engine scanner and scan the engine in the timing mode and adjust the dist. till scaner saids you are within the specs. then clear codes,tighten dist. your done.
What else can I help you with?
Does gmc Yukon have a big block in them?
No, its got a 5.7L V8, 350 vortec
How do you hook up a sunpro tach to a 96 vortec 350 5.7?
well dip$hit gmc make vortec
What is the firing order for a 1998 GMC Yukon 350 Vortec?
I believe it is 18436572 1.8.4.3.6.5.7.2
What is the horsepower for a 96 gmc z71 350 vortec engine?
It has 255 horsepower bone stock
How far do you torque flywheel bolts on a 1998 gmc 1500 350 vortec?
75 ft lbs
Will a 350 vortec out of a 1997 GMC sierra 1500 fit a 1997 Tahoe 4x4?
YES, There the same engines. It will be a direct bolt in.
What is the procedure for valve adjustment on a vortec 350?
how do you set valve on 1998 350 vortec
Was the 1993 Chevy 350 a vortec?
No, the 350 Vortec was not available until a couple years later.
1990 gmc siera can you put a 1996 vortec 350 in it and if so is the cam in a vortec just a good as a RV cam?
You can put the Vortec in it if you have the wiring and ecm to run it. or you could use the Vortec heads and an aftermarket intake and really wake up your engine. The vortecs use a roller cam.
Are the heads on a 1992 Chevy 350 vortec or not?
No, the 1992 Chevy 350 (5.7L) V8 is not a Vortec engine.
Can you replace a 5.7 vortec with a Chevy 350?
A 5.7 is a 350. Vortec is basically the type of head used.
350 vortec hp 305 vortec hp?
a 350 will produce around 250 hp, and a 305 about 200 hp
