The factory alarm can not be disabled. It is part of the body and engine computers. It is reset by unlocking the doors with a key or remote.
Lights, locks, parts of the AC system, gauges, alarm, wipers, ...........
The factory alarm is disarmed by unlocking the doors with a key or remote.
If you are talking the FACTORY alarm system on a 2000 Ford Explorer there is no glass break sensor , you have to open a door to set off the armed alarm system after the glass is broken
What is your problem? Is it because the alarm goes off for no reason? If it is I had the same problem and can help you.
To set the car alarm for a 2000 Mitsubishi Galant, first ensure all doors are closed. Use the key fob to lock the doors, which typically activates the alarm system. If your vehicle has a manual alarm system, turn the key to the lock position in the driver's door, which should also engage the alarm. Wait for the indicator lights to flash, confirming that the alarm is set.
It should be under the drivers seat
The fuse for the alarm system in a 2000 Kia Sephia is typically located in the fuse box, which is found under the dashboard on the driver's side. You can identify the specific fuse for the alarm system by checking the diagram on the fuse box cover or referring to the owner's manual for details. Look for a fuse labeled for the alarm or security system. Always ensure the vehicle is off before checking or replacing fuses.
Unhook the battery.
To disable the alarm on a 2000 Mazda Millenia, try unlocking the driver's side door with the key, as this often deactivates the alarm. If that doesn't work, you can disconnect the car battery for a few minutes to reset the alarm system. Additionally, consult the owner's manual for specific instructions or fuse locations related to the alarm system. If issues persist, consider seeking help from a professional mechanic.
Many camries have manufacture alarm system. You Camry has it, that's why it beeps when you lock the car. It sets yp the alarm system in the position ON.
take the relay out of your fuse box that is for the alarm system. no relay means no power to the alarm system, not a fix but good enough to get you by until you can find the real problem and fix it
If the alarm on a 2000 Honda Accord is randomly making noise there may be a problem with the wire harness. When the brain or siren has a short it will randomly make noise and sound off the alarm system in the car.