I just replaced the ABS module on my 2001 ram 1500 and it was simple. It took only about 20min and is easy to access.
easy
Both a Turbo and a Supercharger are relatively easy to install on the Chargers.
There cheap and easy to install!
All you have to do is press The hour/min button with a pen tip....easy as that
Haynes repair manual, Dodge Neon 2000 thru 2003. Book #30036 The horn module is located in the fuse box that is located on the left side of the engine compartment. The underside of the cover is marked so that it is easy to find.
The daytime running light module is located behind the front driver's side fender below the turn signal. It is easy to see from below.
Check with your local part store for a bypass pulley or belt.
it is not expensive and if you have a workshop manuel, it is an easy job
How far are you in the process? Respond to me at GrillemanSP@yahoo.com, it is not a easy job. I done a few on Dodge's.
The camshaft position sensor, which is located inside the distributor, is a pretty easy component to test on the 1992-1995 5.2L/5.9L Dodge Ram 1500/2500 pickup.
No. The size of the factory radio is 1.5 din. In order to install a double din radio you will have to customize your dash (not easy) or purchase a custom dash (look on ebay). Unfortunately only a couple of people make the dashes so they aren't very cheap.
Bout 5-10$ if u do it yourself. Really easy. Follow upper ratiator hose to intake. It is under that.