are you mechanically inclined if so very esay. get a 10" in C clamp you will need to push both pistions in at once so use the old brake pad and the C clap to puch them in slowly
How hard and how do you replace the rear disc brakes on a 2003 Ford explorer? I have replaced a lot of brakes from 60s and 70s to the newest replacements of 91 Ford explorers and 91 Ford f-250s front rotors.
You will need to remove the front tires. Remove the brake assembly spring. The brake shoes will come off. Reverse the process to install the new brakes.
We just had the brakes replaced on our 2003 Pilot. Cost to replace both sets of pads (front and rear) and rotate rotors was about $500. Cost for 2004 would be similiar.
to change brakes on a 2005 trailblazer do i need a star bit to remove cailber pins
I have a 2003 and the front disc brakes have a torque nut not hex.
To replace the brakes, lift the car on a jack, remove the tire, brake shoe and old brake pad. Next put in the new brake pads, put the brake shoe and tire back on the car, and lower the car.
what tools do i use to change the front brakes in my 2003 Pontiac grand prix
go to following link you will get the answer: http://www.wonderhowto.com/how-to-replace-brakes-2003-f150/
Brakes, If you get on brakes and get a hard vibration and shaking like the front end is going to fall off, front rotors are more than likely warped. Stock rotors are poor quality Replace with after market heavy duty rotors.
You can replace the front bearing on 2003 Citroen Relay using air tools.
The 2003 Kia Spectra is equipped with disc brakes in the front and drum brakes in the rear. The front disc brakes provide effective stopping power, while the rear drum brakes are commonly found in compact vehicles of that era. This combination helps balance performance and cost-effectiveness for the vehicle.
replace the front brakes and rotors