answersLogoWhite

0

Not hard at all.

Jack up van and remove wheel.

The sway bar links are attached to the sway bar and strut with 18mm nuts.

Simply remove the nuts (hold onto the bolt end to keep it from twisting with a 5mm allen wrench inserted into the end of the bolt).

If the nut is too rusted to remove, you can also cut it off with a sawzall and a new/or good metal blade.

Attach the a new link and you good to go. (Don't forget to grease the link unless it is a sealed unit)

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

How do you replace the struts on a Chrysler pacifica?

A guide to changing struts your Pacifica is under the related links.


What size windshield wiper blades for a 2002 Chrysler town and country?

The 2002 Chrysler Town & Country Van takes 28" replacement windshield wiper blades on both sides front and an 18" rear wiper blade. See sources and related links below for more informaton.


What are the torque specifications for a Chrysler Town and Country van sway bar links?

65


How do you replace the rear taillight in a 2007 Chrysler Town and Country?

To replace the tail lights on your 04-07 Chrysler Town & Country, you need to lift the tailgate, and there are two plastic plugs (or pins) that hold them in place. Remove those plugs with a flat head screwdriver and the tail lamp will come out. We have also included a link to an auto repair video in the related links section below that will show you exactly how to do this.


Chrysler town and country wiper blade size?

It varies depending on the model year of the Chrysler Town & Country. See sources and related links below to lookup correct wiper blade sizes by model year.


How to replace front brake rotors on a 2000 ford explorer sport 4x4?

How to Install Front Brake Pads Check Related links below.


How much does it cost to replace front sway bar links on a ford focus?

Around 30.00 plus labor.


Where are the fusible links in a 1987 Chrysler fifth avenue?

Should be locate on left front fender well, behind battery, below air intake tube.


How hard is it to replace front and rear anti-roll bar bushes and drop links on a 1998R reg 1.6 16v vauxhall vectra?

The rear are easy enough and the front drop links but for the front anti roll bar bushes you need to drop the front subframe, quite a big job.


How to replace front sway bar links on 98 Chevy FWD Pu?

Buy the links and either use a saws all or torch to cut the old ones off. Then bolt on the new ones.


How do you open engine cover on a Chrysler 691cc boat motor?

There is a switch or lever under the front part of the motor it will be right between the steering links under the bottom front of the mounts My 45hp / 691cc has a lever under the front right of the motor cover facing the back of the boat.


How do know when to replace front tie rod on 2003 Chevy trailblazer?

Your steering linkage get loose. The swaybar end links are also a common failure