0
How is the center panel of the steering wheel removed to replace the on-off control to the cruise control on a 1999 Explorer?
remove the four screws that come from the backside of the steering wheel this should allow you to remove the center part be careful with the air bag connection* Disconnect the battery for thirty minutes to discharge the airbag capacitor before removing the airbag. Wear protective eyewear. Hold the airbag with the cover aimed away from you. Do not mess with the airbag electrical connections while it is disconnected.
What else can I help you with?
How do you replace the cruise control buttons in the steering wheel of a 1999 explorer?
the air bag needs to be removed in order to have access to the screws holding down the switch.
How do you replace steering wheel control light in Silverado?
Have to replace the whole switch
How do you replace an Isuzu Rodeo steering wheel?
To replace an Isuza Rodeo steering the steering column should first be removed. Pop off the front steering wheel cover to see the steering wheel nut. Loosen the nut and remove the wheel.
Replace fuel pump on ford explorer 1993?
The fuel tank will have to be removed from the Explorer. The pump is bolted in the top of the tank.
2004 explorer heater control?
how hard is it to replace the blending door
How do you replace the ball joints on a 02 Dodge Ram 1500 4x4 can they be pressed out of the steering knuckle or control arm or do you have to replace the entire steering knuckle or upper control arm?
They are pressed in and out with a set of special tools.
How do you replace the switches on a 2001 Ford Explorer Sport trac steering wheel?
To replace the switches on a 2001 Ford Explorer Sport Trac steering wheel, start by disconnecting the battery to ensure safety. Remove the airbag by unscrewing the retaining screws from the back of the steering wheel, then carefully detach the airbag connector. After removing the airbag, unscrew the steering wheel using a steering wheel puller, which will allow access to the switch assembly. Finally, disconnect the old switches, replace them with new ones, and reassemble everything in reverse order.
Why is it NECESSARY to remove the steering wheel to replace the ignition switch on a 1994 Ford Explorer?
I was under the impression the switch was on the steering column about 18 inches from the floor. The lock assy is under the steering wheel.
Must the steering knuckle be removed to replace the front coil springs in an 84 Park Avenue?
pop that knuckleSure. Support the lower control arm with a floor jack, separate the steering knucklefrom the upper control arm with a "pickle fork", or other ball joint separating tool.Some auto parts stores will rent the tool to you.
Steering wheel hard to turn in 1994 Lexus ls400?
1991 Lexus ls400 hard steering at ilde rack &pump have been replace all screencleaned or removed.
Sc400 how to replace power steering pump?
There is 3 bolts and the hose lines which need to be removed after removing fan belt
How do you replace cruise control on 1995 Tacoma?
To replace the cruise control on a 1995 Toyota Tacoma, first, disconnect the battery to ensure safety. Remove the steering wheel cover and carefully detach the cruise control switch from the steering column. Install the new cruise control switch by connecting it to the existing wiring and securing it in place. Reassemble the steering wheel cover and reconnect the battery before testing the new cruise control system.
