0
How many bolts are on a 1989 ford ranger 5 spd transmission and if there are any on top how do you get to them?
I don't remember exactly how many bolts there are it's either 6 or 8. There are two on the very top of the bell housing and they are a pain to get to. You have to remove the tranny support bracket so the back end of the transmission will drop down, use a jack to support the end of the tranny and let it down slowly. You will need a long extension (I used one about three feet long) on your ratchet and a swivel socket.
What else can I help you with?
What is the Torque setting on transmission pan bolts 2002 Ford Ranger?
What is the Torque setting on transmission pan bolts 2002 ford ranger?
How many bolts does a 1991 Ranger have in the transmission?
There are 8 bolts on a 4 cylinder Ford Ranger
Will a 1996 Ford Ranger transmission fit on a 1989 Ford Ranger?
what does a fuel pump look like in a 1989 ford ranger 4 cyl.
How do you remove a 1986 Ford Ranger transmission?
You unscrew the bolts.......
What type of automatic transmission does a 1989 Ford Ranger have?
A4LD - 4 speed automatic
1989 Ford Ranger and you have to rev the engine when you are at a stop and then it will move is it your transmission slipping?
check the transmission fluid first
Can you use a transmission from a 1993 Ford Ranger to a 2000 ranger?
can you use a transmission from a 1993 ford ranger in a 2000 ford ranger?
How many rear bolts mount a 1996 ford ranger 4.0 transmission?
A 1996 Ford Ranger 4.0 typically has four rear bolts that secure the transmission to the engine. These bolts are part of the bellhousing assembly and play a crucial role in maintaining a secure connection between the engine and transmission. Always refer to a repair manual for specific torque specifications and procedures when working on the transmission.
How can i tell which 5 speed transmission you i in my 1989 Ford Ranger 2.9 V6?
In a 1989 Ford Ranger : See if there is an information sticker on the end of the drivers door or the latch pillar Transmission code " D " is the Mitsubishi 5 speed manual transmission Transmission code " M " is the Mazda 5 speed manual transmission
What type of power steering fluid is in a 1989 ford ranger?
DEX III Transmission Fluid
What type of fluid goes in a 1989 Ford Ranger 5 speed?
That would depend on which 5 speed manual transmission you have in your 1989 Ford Ranger : The Mitsubishi ( transmission code " D " ) takes ( 80-90W gear lube ) The Mazda ( transmission code " M " ) takes ( MERCON automatic transmission fluid )
Where is the starter in a Ford Ranger 1999?
In my 2002 ranger, the starter is bolted to the bell housing on the driver's side of the transmission. there are two 15mm bolts holding it in.
