There is one on the front passenger side and a torque strut on the front. The torque strut acts like a motor mount.
The 95 Cavalier with the 2.2L engine does not use a belt, instead it has a roller chain/tensioner setup which should last the life of the engine.
A 99 Sunfire 2200 engine will not fit in a 95 Cavalier with a 2.2 due to design and structural differences. Both offer the same size engine but are configured differently.
Engine rod? Engine bearing?
As long as it is the same displacement. Liters/cid. It should
Yes, a 1996 Sunfire engine can fit in a 1995 Cavalier since both vehicles share similar platforms and engine configurations. However, it's important to ensure compatibility with the engine mounts, wiring harness, and sensors. Additionally, modifications may be needed for proper fitment and functionality. Always consult a professional or do thorough research before proceeding with the swap.
body parts: 2000-2002 Engine parts: most of them can be swapped from 95-2002 with the same engine.
Yes, Same engine.
For the 5-spd? Yes the '95 Isuzu tranny can be swapped with the newer 00+ Getrag tranny however the whole shift assembly, cables and transmission/clutch assembly must be swapped aswell. Also new transmission mounts have to be welded to mount the Getrag on the 95-99 engine. Check out J-body.org, there should be a few how-to's on that site.
13.6 u.s. gallons (Not answered by smokingallowed. I answer 95-01 Cavalier 2.4L engine & general 3rd generation chassis questions)
A 1995 Buick Skylark typically has three motor mounts: one engine mount on each side of the engine and a rear mount. These mounts help secure the engine in place and absorb vibrations during operation. If you're considering replacing them, it's important to check for any signs of wear or damage.
if it is the same size engine all parts should fit.cavaliers from 1995 through 2004 are the same
You may have to change the motor mounts but yes it will fit.