GM 4T80-E MH1 Fluid Capacity (Approximate):
Bottom Pan Removal: 6.6L (7.0 qt)
Dry: 13.2L (14.0 qt)
8 quarts
Takes dextron 3
8 quarts
You put it down the tube that holds the trans dipstick.
A 2000 Oldsmobile Alero V6 requires 6.8 quarts of Dexron III fluid.
Probably every 50K should be sufficient
To keep a car running its best, a person has to keep the fluid levels maintained. The 2000 Oldsmobile Alero uses 12 quarts of transmission fluid.Ê
I got 2 gallons of transmission fluid... Use one gallon then keep checking the dip stick for the fluid to rise.
I suspect that the transmission cooler that is built into your radiator has leaked fluid internally into the coolant part of the rad and into the rest of the cooling system.
After changing the transmission pan on a 1992 Oldsmobile Custom Cruiser, you typically need to add about 4 to 6 quarts of transmission fluid. However, the exact amount can vary depending on whether the filter was also replaced and how much fluid was lost during the process. It's best to start with around 4 quarts, then check the fluid level with the dipstick and add more as needed to reach the proper level.
A 1997 Oldsmobile Regency typically requires about 12 quarts of transmission fluid when performing a complete fluid change, including the torque converter. However, if you are only draining and refilling the transmission pan, you may need around 5 to 7 quarts. Always check the owner's manual for specific recommendations and verify the fluid level using the dipstick after filling.
To check the transmission fluid on a 1997 Oldsmobile Aurora, first ensure the vehicle is on a level surface and the engine is warm. With the engine running and the transmission in park, locate the transmission dipstick, which is typically near the back of the engine. Pull out the dipstick, wipe it clean, reinsert it fully, then remove it again to check the fluid level, ensuring it falls within the marked indicators. If needed, add the appropriate type of transmission fluid through the dipstick tube using a funnel.