The GM 3400 engine typically weighs around 350 to 400 pounds, depending on specific configurations and components. This weight includes the engine block, cylinder heads, and other essential parts but may vary slightly based on additional accessories or modifications.
A complete GM Ecotec engine will weigh about 300 pounds. This of course is the complete engine, down to the bolts and all.
7.4 grams
the only engine that comes in the venture vans is the 3400 (3.4L) GM V6
The General Motors 3100 family of after 1996 underwent a changeover to interference designs. This standardized GM powertrains design across multiple platforms such as the 3400 and 3500.
About 3 gm.
50 gm
Modern "golden" dollars and Anthony dollars weigh 8.1 gm All US paper bills weigh 1 gm
I BELIEVE it is 4 quarts. Put in 4 quarts, and then check your dipstick. I know 3100's and 3400's are 4.5quarts but the newer engine is different.
Modern copper-nickel dimes weigh 2.27 gm. Older (1964 and earlier) 90% silver dimes weighed 2.5 gm.
Assuming "100" means "$100", there are 20 nickels in a dollar so $100 is 2000 nickels. US nickels weigh 5 gm so 2000 of them weigh 5*2000 = 10,000 gm, or 10 kg. Current Canadian nickels weigh 3.95 gm so 2000 of them weigh 3.95*2000 = 7900 gm, or 7.9 kg.
it has a double-roller timing chain.
For the 3400 SFI engine, the recommended coolant is a 50/50 mix of ethylene glycol-based antifreeze and distilled water. It's important to use a coolant that meets the specifications of GM's Dex-Cool, which is formulated for use in many General Motors vehicles. Always ensure the coolant is mixed properly to prevent engine overheating and corrosion.