The cost to replace an instrument cluster on a 2000 Saturn typically ranges from $200 to $600, depending on whether you choose a new, used, or refurbished part. Labor costs can add an additional $100 to $200 if you have it installed by a professional. Prices may vary based on location and the specific model of the Saturn. Always check with local mechanics or auto parts stores for the most accurate estimates.
You will need to remove the instrument cluster board. To do that, remove the trim piece around the instrument cluster, then carefully pull the instrument cluster out of the dashboard. Note that the instrument cluster plugs in to a socket in the dashboard, so be careful as you remove the circuit board so that you do not damage the plug. Once the instrument cluster is out, replace all bulbs. They twist to remove, and if the odometer bulb has failed, the others are getting old too. It might be best to replace them all to avoid future problems.
Behind the instrument Cluster. Or remove it and replace the Cluster.
You take out the cluster and replace the bulbs in the back of the cluster. Very simple job, takes baout 10 mins!
you cannot service panel lights on 2000 impala . you hav to replace the instrument cluster.
Below the instrument cluster is a trim piece that goes across the width of the instrument cluster. Remove the 4 screws then remove the trim piece. Remove the screws that retain the instrument cluster, then carefully pull the instrument cluster STRAIGHT BACK. The instrument cluster plugs in to a matching socket in the dashboard. Be certain that the pins do not get bent. It's a good idea to replace all of the bulbs once one burns out. The rest will be failing soon. There are two types of bulbs used in the dashboard, they might only be available at a GM dealership. Replace all of the bulbs. Carefully push the instrument cluster back into the dashboard, then test the lights and make certain that the instruments and indicator lights work before putting everything else back together. Replace the trim ring around the instrument cluster. Replace the bottom trim piece... Done. ... at least, that's how it works on the 2000 LS
To replace the instrument cluster lights in a 2000 Toyota Corolla LE, start by disconnecting the negative battery terminal to ensure safety. Remove the trim panel surrounding the instrument cluster by carefully prying it off. Then, unscrew the cluster from the dashboard and gently pull it forward to access the back. Twist the bulb sockets counterclockwise to remove them, replace the old bulbs with new ones, and reassemble everything in reverse order.
To replace the bulb in the instrument dashboard panel cluster of a 2000 Toyota Avalon XLS, first disconnect the negative battery terminal to ensure safety. Remove the trim panel surrounding the dashboard to access the instrument cluster; this typically involves unscrewing or unclipping the trim. Once the cluster is exposed, remove the screws holding it in place and gently pull it out. Locate the burnt-out bulb, twist it counterclockwise to remove, and replace it with a new bulb before reassembling the cluster and trim.
Sure, but at some effort. You need to remove the instrument cluster from the dash to replace it.
To get to the clock you must remove the black plastic piece that is around it that surrounds the computer buttons and surrounds the instrument cluster. There are some screws around the instrument cluster, the rest snaps together.
How can I replace the headlamp on a 2000 Saturn SL1
Bad news - there is no light bulb. The cluster is light using electro-luminesence, which means the entire thing needs to be replaced.
To replace the instrument panel lights in a 2000 Volvo S70, first, disconnect the car battery to ensure safety. Remove the trim surrounding the instrument panel by carefully prying it off. Unscrew the panel screws, then pull the instrument cluster out. Finally, twist the bulb sockets counterclockwise to remove the old bulbs and replace them with new ones before reassembling the panel.