0
What else can I help you with?
How much to replace tie rods on 1997 crown Victoria?
The total cost, including parts and labor, to replace the tie rods on a 1997 Ford Crown Victoria ranges from $215 to $335. The cost can vary depending on where you go.
How much does it cost to replace the heater core in a 1997 crown Victoria?
Around $500. $450 in labor and the heater core is about $50. PITA job!
How much should it cost to replace a starter on a 2001 crown Victoria?
The cost to replace a starter on a 2001 Crown Victoria typically ranges from $200 to $500, including parts and labor. The starter itself usually costs between $100 and $200, while labor can add another $100 to $300 depending on the shop's rates. Prices may vary based on location and whether you choose OEM or aftermarket parts. It's advisable to get a few quotes from local mechanics for the best estimate.
How do you replace the starter on a 93 ford crown Victoria?
It will be a lot easier to put the car on a hoist. There are 3 bolts, and they are very hard to get to, even on a hoist. Pay the garage 1 hour labor, believe me it will be worth it. That's how long it takes..........
How much does it cost to replace a steering column in a 1996 ford crown Victoria?
The cost to replace a steering column in a 1996 Ford Crown Victoria typically ranges from $400 to $800, including parts and labor. The price may vary depending on the mechanic's rates and whether you choose new or used parts. Additionally, if there are any related issues, such as electrical problems or additional repairs needed, the cost could increase. It's advisable to get a few quotes from local mechanics for a more accurate estimate.
How much should it cost to replace the complete steel brake line system in a ford crown Victoria?
The rear lines are fairly easy, about 1 and a half hours work, the parts around 100. $ The front lines are around the same in labor, a little less in the cost.
How much general cost to change the temp door actuator?
The cost to replace a temperature door actuator typically ranges from $100 to $400, depending on the vehicle make and model, as well as labor rates in your area. Parts alone may cost between $30 and $150, with the remainder attributed to labor. It's advisable to get a quote from a trusted mechanic for a more accurate estimate.
How much does it cost to replace bad valve on crown vic?
A Lot, it requires the motor to be taken apart, so labor costs are really high. your looking at around $800 atleast for labor plus the parts.
What would an estimate be to replace an oil pan on a 1992 crown vic?
About $150-$200 labor plus the cost of the oil pan if you don't have one already.
How much would it cost to get a water pump replaced at a shop for a 1989 Crown Victoria 5.0L?
About 1 hours labor, plus the water pump and any coolant needed. That is of course there are no problems.
How do you change a heater core on a 1993 Crown Victoria?
I had a 94 CROWN VICTORIA and i needed a heater core so I looked into doing it myself. You have to tear down the whole dash. A 3-4 hour job for an experineced mechanic. So you are looking at a 300-400 dollar repair. The part Oem cost only about $70 but it is labor intensive.. Good Luck. I had a 94 CROWN VICTORIA and i needed a heater core so I looked into doing it myself. You have to tear down the whole dash. A 3-4 hour job for an experineced mechanic. So you are looking at a 300-400 dollar repair. The part Oem cost only about $70 but it is labor intensive.. Good Luck.
How much should it cost to repair the door lock actuator on a Nissan Murano?
The cost to repair or replace a door lock actuator on a Nissan Murano typically ranges from $150 to $400, depending on factors such as labor costs, parts prices, and whether you choose OEM or aftermarket parts. Labor can account for a significant portion of the cost, often ranging from $75 to $150 per hour. It's advisable to get quotes from multiple repair shops to ensure a fair price.
