0
What else can I help you with?
How many quarts of transmission fluid does a 1985 Pontiac fiero gt automatic transmission hold?
The 1985 Pontiac Fiero GT with an automatic transmission typically holds about 6 to 7 quarts of transmission fluid, including the amount needed for the torque converter. It's essential to check the owner's manual or consult a service manual for the exact specifications and to ensure proper fluid levels during maintenance.
Does a 1985 Pontiac fiero have a transmission solenoid?
The automatic has one for the lock up torque converter
Does a 1985 Pontiac fiero 4 cylinder trans fit in a 1985 v6 Pontiac fiero?
Yes, sort of, The clutch is different.
How do you adjust transmission linkage on a 1985 Pontiac fiero 4 speed manual transmission?
The adjustments are pretty obvious on the the top of the transmission under the air intake and exhaust plumbing.
Where is the slave cylinder on a 1985 fiero?
On a 1985 Pontiac Fiero, the slave cylinder is located on the transmission, specifically mounted on the side of the transmission housing. It is accessible from underneath the vehicle, near the bellhousing where the transmission connects to the engine. To reach it, you may need to lift the car and potentially remove some components for better access.
What is the stock horsepower of a 1985 Pontiac Fiero?
what is the smog and vaccum diagram for the 87 Pontiac fiero 2.5L 4 cylinder what is the smog and vaccum diagram for the 87 Pontiac fiero 2.5L 4 cylinder
What is the Normal operating temperature for a 1985 Pontiac fiero?
About 185F.
How do you adjust the shifting linkaGe on a 1985 Pontiac fiero 5 speed manual transmission?
The adjustments are pretty obvious on the the top of the transmission under the air intake and exhaust plumbing.
How do you adjust the shifting linkage on a 1985 Pontiac fiero 5 speed manuual transmission?
The adjustments are pretty obvious on the the top of the transmission under the air intake and exhaust plumbing.
How do you remove a slave cylinder from a 1985 Pontiac Fiero GT?
To remove the slave cylinder from a 1985 Pontiac Fiero GT, first, ensure the vehicle is safely elevated and supported. Disconnect the hydraulic line from the slave cylinder, being careful to catch any fluid that may leak. Then, remove the two mounting bolts securing the slave cylinder to the transmission bell housing. Once the bolts are removed, gently pull the slave cylinder away from the transmission to complete the removal.
Where is the neutral safety switch on a 1985 Pontiac fiero with a manual transmission?
There is no neutral safety switch on a 85 fiero with a manual transmission. There is a clutch pedal switch under the dash. The car will start in any gear, as long as the clutch pedal is depressed.
How much did a 1985 Pontiac Fiero cost brand new?
about 10k
