answersLogoWhite

0

I had mine replaced today and they also replaced the oil and air filters and the total cost was $370 with tax. I live in Baton Rouge, LA.

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

How do you replace the starter on your 1994 Ford Ranger?

should be 3 bolts attaching the starter 2 possibly retreivable from top but 3rd must get from under the vehicle. Be sure to disconect the battery first as to not cause problems. Good luck


How do you replace starter on 1994 Chrysler Town and Country van?

You can replace the starter, on your 1994 Chrysler town and country Van, by removing the starter wiring. Remove the three retaining bolts. The starter will come off. Reverse the process to install the new starter.


Should you replace the slave cylinder when you replace the clutch in a 1994 ford ranger?

Not if it is working alright. however if you suspect its the worst for wear it would be a good idea,


Where is the starter on 1994 ranger?

on the driver side underneath, it right by you tire and it hook up to your tranny


How do you change the starter on a 1994 ford ranger 4.0L?

Get a repair manual from your local auto zone its hard to explain where it is, on my 4.0L Ranger its on the bottom left .


How do you remove the starter on a 1994 ford ranger?

Disconnect the - battery terminal Raise and support vehicle if needed Disconnect wiring at top of starter Remove mounting bolts Drop starter


How do you replace the starter on a 1994 Toyota Celica?

remove the neg battery cable then the wires on the starter. Then take out the mounting bolts and work the starter out.


Step by step directions for replacing the starter on a 1994 Honda Accord?

Is there a good site to go to asap to find how to replace a starter for a 1994 Honda Accord EX


How do you replace a solenoid for a 1994 Buick LeSabre?

Do you mean the starter solenoid? It's the part of the starter where the wires are bolted on. You'll have to remove and rebuild the starter.


Does the transmission of a 1994 ford ranger 2.3l have to be removed to replace the slave cylinder?

yes


How do you change the starter solenoid on a 1994 for ranger with a 3.0l v6 automatic?

The starter solenoid is mounted on the top of the starter. Remove the retaining bolts. The starter solenoid will come off. Reverse the process to install the new one.


What color is the ignition wire on a 1994 Ford Ranger?

should be red and light blue from the ignition switch to the starter relay