answersLogoWhite

0

I don't know that there is really any set replacement time for these. If you're smelling gas fumes and have ruled out everything else, the vapor canister could be the cause. These can also be "rebuilt". You can empty out and replace the charcoal and put a new filter in the bottom of it. That's pretty much it.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

How do you change fuel pump on 1988 Oldsmobile cutlass?

should be on the passanger front of engine, three screws. just pull.


Where is the cam sensor located on a 94 Oldsmobile ciera cutlass s?

The 1994 Oldsmobile Cutlass cam sensor is located on the back of the left cylinder head. The cam sensor should be labeled as such.


What should the water temperature be in a 1972 Oldsmobile Cutlass.?

Around 180 to 190 degrees fahrenheit.


Where is the speed sensor located on a 1996 Oldsmobile cutlass ciera?

It should Be located on the top of the transmission.


What is the cooling system fluid capacity for an 1987 Oldsmobile cutlass cierra?

The 1987 Oldsmobile Cutlass cooling system has a fluid capacity of 5.5 gallons. The cooling system fluid should consist of 50 percent antifreeze.


How do you route a serpentine belt on Oldsmobile Cutlass Ciera?

There should be a diagram there. If not go to an autoparts store and they can find out for you.


Where is the cooling fan relay located in 1991 Oldsmobile cutlass ciera?

The 1991 Oldsmobile Cutlass cooling fan relay switch can be found attached to the right side of the radiator housing. The cooling fan relay switch should be labeled as such.


What is code 42 on a olds cutlass ciera?

Code 42 on an Oldsmobile Cutlass Ciera means you have a faulty ignition control module. You should inspect all electrical connectors to ensure they are tight.


Where is the radiator drain petcock on a 1995 Oldsmobile Cutlass Cierra?

Should be at the bottom or rear of the radiator or remove the lower radiator hose


Where is the fuel filter on a 1969 Oldsmobile cutlass?

Should be right in front of the carburetor, basically centre of the engine, steel pipe going into it.


Where is the horn relay on a 1994 Oldsmobile cutlass Ciera?

the horn relay switch is in the fuse panel or it should be on the horn wires itself


How many PSI should the fuel pressure be in a 1992 Oldsmobile Cutlass Ciera with a 3.3L?

The Pressure Has To Be Arround 30 to 40 psi