0
What else can I help you with?
How often do the spark plugs need to be replaced on a 2002 Chrysler pt cruiser?
Every 60,000-100,000 miles.
How many spark plugs are in a 2001 Chrysler PT Cruiser?
Four.
What type of spark plugs to buy for a Chrysler PT Cruiser?
Use the same Champion plugs the factory installed.
How many spark plugs in a 2005 Chrysler pt cruiser?
Four, one per cylinder.
Why does a Chrysler Pt cruiser Idle rough after new spark plugs?
Maybe when they put the spark plugs in they were not gapped right or they maybe the wrong spark plugs.
How do you tune up a Chrysler PT Cruiser?
Tuning up a Chrysler PT Cruiser can be done at home or by a mechanic. A tune up will consist of an oil change, changing the spark plugs and wires, air filter, and distributor cap.
How do you change spark plugs on a 2001 Chrysler pt cruiser?
To change the spark plugs on a 2001 Chrysler PT Cruiser, first, ensure the engine is cool and disconnect the battery. Remove the engine cover if necessary, then carefully pull off the ignition coil connectors and unscrew the coils to access the spark plugs. Use a spark plug socket and ratchet to remove the old plugs, and install the new ones, ensuring they are properly gapped. Finally, reassemble the ignition coils and reconnect the battery.
How do you change the spark plugs in 2003 PT Cruiser?
Spark plugs in a car need to be replaced every once in awhile. To replace them, disconnect the battery, disconnect the cables, remove the old spark plugs, replace with new spark plugs, reconnect the cables, and reconnect the cat battery.
How do you replace spark plugs 2000 Chrysler cirrus 2.5L?
You have to remove the upper intake manifold.
What causes a Chrysler PT Cruiser to miss?
Causes of a misfire include spark plugs, coils, fuel injector, wiring, computer, or internal engine problems.
How do you replace the spark plugs in a Chrysler PT Cruiser?
Removing spark plugs on a pt cruiser. the throttle body has 3 13mm bolts The throttle body on my 2003 was held to the bracket with only 2 13mm bolts. My 2004 non-turbo has only one. Per a commenter at ptcruiserlinks.com plugs should be torqued to 13 ft/lb +/-2. Per Chrysler, the plugs should be gapped at 0.040" I found the spark plug wires very difficult to remove, but with persistence, I was able to get them off the plugs. Try twisting then back and forth while pulling. There is nothing special about the way they're connected. It's just that the rubber boot seems to adhere to the top of the plug.
What size socket do i need for 2005 Chrysler PT Cruiser spark plug replacement?
the spark plugs require a 5/8 inch spark plug socket.
