0
What else can I help you with?
Should an ammeter always be connected in parallel with a component?
No, an ammeter should never be placed in parallel with a component - it should always be placed in series, so that the current through the component is measured.If you place an ammeter in parallel with a component, you create a short circuit around the component. Depending on the rest of the circuit, you could damage the circuit, damage the ammeter, create a fire, etc. You certainly will affect the current through the component, and that is not what you want to accomplish.
What happen when a ammeter is placed in parallel with the circuit?
If an ammeter is placed in parallel with a a load on a circuit, the circuit can short out as the ammeter takes the place of the load, flowing freely through the meter. Never measure across a resister or other electronic load with an ammeter. Remember, ammeters are used in series while voltmeters are used in parallel.
How would you connect an ammeter if you want to measure the current coming through some device in a circuit?
HOW TO CONNECT AN AMMETER Always connect an ammeter in SERIES in a circuit. Always ensure that the ammeter has a higher reading range than the expected current load, including start-up spikes. An ammeter expected to read a steady current of 13A should have a max range of 20A.
How should a ammeter and voltmeter be connected in circuit?
Ammeter is coneccted in series with circuit but Voltmeter is connected in parallel.
Why ammeter cannot be connected in parallel?
An ammeter has low resistance (ideally no resistance) because it is placed in series with other circuit elements to detect how much current is flowing. If it is placed in parallel with a component it will short-circuit it. That is a bad thing.
Does it matter where you place an ammeter in a circuit?
Ammeters must always be placed in series in a circuit, otherwise they will not work babes :)
How does the current change in a circuit when the ammeter is placed in different spots?
the current value at any part of the circuit is dependent upon the circuit conditions and not the ammeter. The meter will simply allow you to read those currents, whatever they may be.
How you connect an ammeter to a circuit?
How do you connect an ammeter to a circuit?
How an electric current is measured?
Electric current is typically measured using an ammeter, which is a device connected in series with the circuit. The ammeter measures the flow of electrons passing through a given point in the circuit, usually in units of amperes (A). The ammeter must be placed in series with the circuit to ensure that the current passes through it and can be accurately measured.
How would a ammeter be connected in a circuit?
An ammeter is always connected in series in the circuit.
How is ammeter and voltmeter attached to a circuit?
Ammeters are connected in series with the load under test. This requires the load be disconnected from the source, and the ammeter placed in circuit. Voltmeters are connected in parallel with the load under test. This does not require any circuit changes. Sorry, but WikiAnswers does not support illustrations.
The electrical meter that should be connected in series with a live circuit is?
ammeter
