For pads only, remove single caliper bolt and rotate the caliper away/off the rotor as it will pivot on the anchor bolt on other end. Pads will easily pop off. Caliper piston is a screw design and will need tool from auto parts store. hope this helps!
What year? Most are rear disc from some where around 79 and on?
To replace the rear brakes on a 2007 Buick Lucerne, first, lift the rear of the vehicle and secure it on jack stands. Remove the wheel and tire, then locate the brake caliper and remove the caliper bolts to detach the caliper from the rotor. Carefully slide off the old brake pads and replace them with new ones, ensuring to compress the caliper piston back into the caliper housing. Reattach the caliper, replace the wheel, and lower the vehicle before testing the brakes.
Yes.
Specs 98 Buick Park Ave rear pads
u do it
just replace the rear brakes
i need a diagram on how rear brakes are assembled
Mine had drum in rear Mine had drum in rear
how to replace rear brakes on 1972 f600
If the truck has disc brakes on the rear then the park brake shoes are located inside the rear rotors. You have to remove the brake calipers, pads and rotors to access them
Take the light assy off of the car and the bulb screws in from the rear.
Rear brakes do not have to be replaced too often. It's really hard to tell without looking at it. What you can do is to replace front brakes and test drive it, if you feel that your car brakes works just fine you do not need to replace rear brake shoes.