0
What else can I help you with?
How do you remount a rear view mirror to the windshield on a 2002 X TYPE?
There is a little piece of metal to which the mirror assemby attaches. Remove that from the mirror assembly, clean off the old glue then purchase some mirror adhesive from your local auto parts store. It looks a lot like super-glue, but is a little more UV resistant and holds up well on the windshield. After you've attached the little piece of metal to the windshield, let it cure for however long the instructions say, then hang the mirror assembly from the mounting piece and re-attach the mirror. If any of the glue runs down the windshield, let it dry and scrape it off using a single edge razor blade or scraper.
How do you replace the driver's side mirror in a 2002 Jeep Grand Cherokee Laredo?
First you need to remove the door skin , once this is removed you should see three screws that attach the mirror, remove them....if it is a heated mirror you will need to unplug and replug the new one in before attaching the new mirror...hope this helps
How do you repair a leek in the windshield wiper hose on a Mercury Grand Marquis LS 2002?
Replace the hose.
Were is fuel pressure regulator on 2002 grand marquis?
It's on the end of the fuel rail near where the fuel lines attach.
How do you open a rear view mirror on a 2002 Buick rendezvous?
To open the rearview mirror on a 2002 Buick Rendezvous, locate the adjustment lever or tab at the base of the mirror. Gently pull or slide the lever to release the mirror from its mount. If you need to access wiring or features like auto-dimming, you may need to unscrew the mounting bracket from the windshield. Be cautious to avoid damaging the glass or the mirror itself during this process.
On a 2002 Dodge Grand Caravan how do you reattach a loose passenger side view mirror?
To reattach a loose passenger side view mirror on a 2002 Dodge Grand Caravan, first, locate the screws or bolts securing the mirror to the door. If the mirror is only loose, tighten these fasteners using the appropriate screwdriver or socket wrench. If the mirror has come completely off, you may need to realign it and then secure it back in place. Ensure the adjustment mechanism is functioning correctly before finishing the reinstallation.
2002 Jeep Grand Cherokee passenger wet floorboard?
Plugged up drain lines located below the windshield trough beneath the hood.
How to replace driver side power mirror on a 2002 Nissan Altima?
To replace the driver side power mirror on a 2002 Nissan Altima, start by removing the interior door panel. This typically involves unscrewing screws and gently prying off clips. Once the panel is off, disconnect the wiring harness for the power mirror and remove the bolts securing the mirror to the door. Install the new mirror by reversing the steps: attach the mirror, reconnect the wiring, and reassemble the door panel.
External dimensions of grand Cherokee model year 2002?
Overall width, not counting the mirrors, is 72.3 inches, or 1.836 meters. Nobody is willing to say how wide the actual mirror-to-mirror size is.
How do you reattach the rear view mirror on a 2002 Acura TL?
You buy rearview mirror adhesive from a auto store. 02/02/2009: I recently had a hack job done by a reputable company (new employee who no longer works there) when my windshield was replaced on my 2000 Acura TL. Now I know that you don't yank the thing off the windshield or cut the 3 power wires that makes it a power rear view mirror. There is a clip that is located in the headliner that should be unplugged and then re-plugged for a nice neat look. The windshield that was ordered for my car had a roundish metal piece embedded in the glass for where the mirror should be replaced.
Windsheild wipers skipping on low 2002 trailblazer?
The 2002 Chevrolet trailblazer windshield wiper motor should be replaced, when the windshield wipers are skipping. The windshield wiper motor can be located in the engine compartment.
How do you change the side view mirror on 2002 diamante?
To change the side view mirror on a 2002 Mitsubishi Diamante, first, disconnect the car battery to ensure safety. Remove the interior door panel by unscrewing any screws and carefully prying it off to access the mirror’s mounting bolts. Disconnect the electrical connector if it's powered, then remove the bolts securing the mirror to the door and take the old mirror off. Install the new mirror by reversing the process: attach it with bolts, reconnect the electrical connector, and reassemble the door panel.
