0
you insert a pry bar between the spindle and the control arm and pry to see if there is any play in the control arm if there is no play then its fine. (the nut gets loose sometimes). hope this helps! you insert a pry bar between the spindle and the control arm and pry to see if there is any play in the control arm if there is no play then its fine. (the nut gets loose sometimes). hope this helps!
What else can I help you with?
You have no dash lights at all in your 1989 s10 blazer what could be the problem?
If you have no dash lights at all on your 1989 S10 Blazer, a blown bulb can be the problem. You should also check the fuse.
How do you change upper and lower ball joints on a Chrysler 300?
What year, if it has upper it has to be pre 1989
Would a 1989 Honda prelude 2.0si have rear upper and lower ball joints?
Yes.
1989 s10 blazer?
OK, you have a 1989 S-10 Blazer. What is your question?
Why does a 1989 Chevy S10 Blazer stall when you stop?
check for vacuum leaks that wull usually cause this problem
1989 Chevy Blazer?
What about it?
What is a Chevy 1989 s10 blazer worth 149k miles?
Depends on the condition it is in. Best reference places to check are KellyBlueBook.com or edmonds.com.
1989 s10 blazer 4.3 runs for 5 seconds then dies something seems to turn off fuel pump?
Check fuel filter...Check fuel pump...
Where is the starter on a 1989 Chevy capice classic?
Check the lower rear end of the engine
Will a 1989 Chevy Blazer transmission fit a 2000 Chevy Blazer?
No it will not even bolt up. GM redesigned the transmission and its not even close to being the same as the 1989 trans.
Is the speedometer on a Chevy Blazer electronic or by cable?
I believe that the first digital cluster on a S-10 Blazer was in 1989.
What other years blazer parts are interchangeable with a 1989 Chevy blazer?
1982 - 1994 (early year models).
