0
What else can I help you with?
Where is the radiator cap on the 2002 Ford Ranger?
Does not have one. Just a reservoir.
How do you flush the radiator on a 4 liter 2000 ford ranger?
Buy a flush kit at Wal-Mart or auto parts comes with fittings adaptors and instructions
Install ignition 2002 Ford Ranger?
install ignition 2002 ford ranger directions
How do you replace a motor mount on 2002 Ford Ranger?
how do you change motor mount on 2002 ford ranger
How do you flush out a heater core for a 2002 Ford Ranger?
Buy a kit at Wal-Mart or auto parts store comes with fitting, adaptors, and instructions
What kind of coolant does a 2000 Ford Ranger take?
what type of radiator fluid does a 2000 ford ranger take?
How full does the radiator of 2000 ford ranger have to be?
On a 2000 Ford Ranger : With the engine cold the radiator should be filled to the seat for the radiator cap and the engine coolant reservoir should be filled to the cold mark
How do you do a radiator flush on a Ford Fiesta?
Drain the radiator. Leaving the drain plug open, run water from a hose into the radiator and continue to flush until the out coming water is clear.
Where is the thermostat located on a 2002 Ford Ranger?
follow the top radiator hose to the engine, the thermostat is located in the housing that that end of the hose is connected to
How do you flush radiator on 1996 ranger?
To flush the radiator on a 1996 Ford Ranger, start by ensuring the engine is cool and then drain the coolant by removing the drain plug at the bottom of the radiator. Next, fill the radiator with a flushing solution or water, run the engine for about 10-15 minutes with the heater on, and then turn it off and let it cool. Drain the flushing solution or water, then refill the radiator with a 50/50 mix of coolant and water to finish the process. Always dispose of old coolant properly and check for leaks after refilling.
What is the spark plug gap for a 2002 Ford Ranger 3.0L?
.044 inch for the 3.0 liter in a 2002 Ford Ranger
How is the radiator drained on a 2002 ford ranger?
Let the engine cool down. Locate the lower water hose at the bottom of the radiator. Unfasten the clamp or clamps, pull on the hose and the water comes out.
