answersLogoWhite

0

you have to drop the pan and there are 2 @ the front with 2 wire connectors, one is spring loaded. there are push clips holding the sensors in that can be popped off with a small screwdriver. just did mine and it took about 3 hrs

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

Where is the solenoid on 1992 Chevy s10 blazer?

The starter solenoid is attached to the starter.


Where is the vacuum solenoid located on a 2001 Chevy blazer?

no


Where is the solenoid on 1984 Chevy S-10 blazer?

Starter solenoid? It is attached to the starter.


Where is the solenoid - canister purge on a 2000 Chevy blazer?

by the tank or evap canister


Where is the vacuum switch solenoid on your 2001 blazer It works with the air pump.?

The 2001 Chevy Blazer vacuum switch solenoid can be found on the firewall in the engine compartment. The vacuum switch solenoid will be on the passenger side of the firewall.


Where is a pressure control solenoid located in a 1998 Chevy blazer?

Not sure what pressure control solenoid is, could it be the fuel pressure regulator?


Is there a starter relay for a 1994 Chevy S-10 Blazer?

No, there is a starter solenoid located on the starter motor.


Where is the starter solenoid on a 1995 Chevy blazer?

It is attached to the starter. The positive battery cable runs directly to it.


Where are the shift solenoid A located on a 2000 s-10 Chevy blazer?

Inside the transmission pan area.


Where is the starter solenoid located on a 1997 Chevy S10 Blazer?

It is attached to the starter, just follow the positive battery cable from the battery, it will lead you to the starter solenoid.


Where is the shift solenoid located on a 2000 Chevy Blazer?

you have to take the transmissionpan off and it is located at the end closest to the engine.


1987 Chevy blazer wont turn over after replacing starter?

did you check your battery and alternator?