pull the strap in the trunk then push the seat down
There are five steps on how to remove the back seat in a 1997 Chevy Malibu. Some of the step-by-step instructions are open the trunk lid, pull the top portion of the backseat all the way down, and then pull the top portion of the backseat all the way down and locate the hinges from which the seat pivots.
The bottom portion of the seat will pull out but the back of the seat will have to be unbolted and then slid out to access the trunk.
because the engine in that car does not cool down
Yes, the bolt that holds the harmonic balancer in place on a 2001 Chevy Malibu is reverse thread. I learned that the hard way and stripped the head of my bolt down to nothing. And the bolt is almost impossible to find, because they no longer make them.
on the 2000 Malibu 3.1 it is on passenger side between engine and firewall. if not there, check near right strut tower!!~ the cap is marked with a "L" on it, about 2 feet down.
I have a98 Chevy Malibu. I get about 330 miles for a full tank. I don't what that breaks down to but i hope that helps.
I have a base model and my back seat can be removed but it does not fold down. With the LS model the back seat folds down. Just depends on your model.
it is located about half way down in back of engine on passengers side,between engine and firewall.
kick down cable is out of adjustment from pedal to transmission.
Either the coils are no good or its misfiring
To fold down the backseat in a 2011 Chevy Impala, locate the release levers on the top of the seatbacks. Pull the levers to unlock the seatbacks, then push them forward to fold them down. Ensure the front seats are moved forward if needed for clearance. Always check the owner’s manual for specific instructions and safety guidelines.
The back seat of a Chevy Cavalier is a split bench seat. The release for the seat is located in the trunk behind the split. Simply pull the release and fold the seat down.