the finish panel that's around your radio needs to come of.the bezels at the bottom should be cigaret lightet on bottom left and i pod or just a blank bezel on bottom right pop those out.the pop out from botom.then there should be two 7mm screws take those out.gently pull on your finish panel.the radio has 4 7mm screws.when putting this back together watsh your climate control wires make sure they are tucked away.
Remove the decorative stereo cover. Remove the stereo retaining screws. Pull the stereo out and remove the wiring harness and the antenna cable.
You must buy a Ford Factory Stereo Removal Tool. then pull the radio forward and unplug the wiring in the back.
Remove the decorative stereo cover. Remove the stereo retaining screws. Pull the stereo out. Remove the wiring harness and the antenna cable.
Remove the retaining cover from your stereo. Remove the stereo retaining bolts. Slide the stereo out and remove the wiring harness. Reverse the process to install your new stereo.
yes
Remove the decorative cover from your 2006 Chevy Express stereo. Remove the stereo retaining screws. The stereo will slide out. Remove the wiring harness and the antenna cable from the back of the stereo.
Remove the decorative stereo retaining cover. Remove the stereo retaining screws. Slide the stereo out and remove the wiring harness and the antenna cable.
Remove the cover from your 2001 Chevy Silverado stereo. Remove the stereo retaining bolts. Remove the wiring harness and the antenna cable from the back of the stereo.
Remove the decorative cover to your 2001 Chevy Lumina stereo. Remove the stereo retaining screws. Slide the stereo out and remove the wiring harness. Remove the antenna cable.
To remove the stereo from a 2008 Ford Escape, first disconnect the negative battery terminal to ensure safety. Then, use a trim removal tool to carefully pry off the panel surrounding the stereo, starting from the bottom. Once the panel is removed, unscrew the mounting screws securing the stereo in place, pull the stereo out, and disconnect the wiring harness and antenna cable from the back. Finally, replace the panel and reconnect the battery.
remove the plastic panel around the stereo by using a flat screwdriver to pop it out in all corners then remove screws then remove stereo remove the plastic panel around the stereo by using a flat screwdriver to pop it out in all corners then remove screws then remove stereo
Remove the 2002 Dodge Durango factory stereo decorative cover. Remove the factory stereo retaining screws. Pull the factory stereo out. Remove the wiring harness and the antenna cable from the back of the stereo.