somebody suggested looking in the beep beep manual
You don't remove the fender; the battery is behind the inner fender well behind the rear driver's-side tire.
Remove the driver's side rear wheel; remove the inner fender well behind the wheel.
The battery is in the driver's front fender in front of the wheel. You have to remove the driver's side tire and inner fender cover to access it.
Remove driver side front tire. remove inner fender liner. Battery is inside the front fender wheel.
Inside the fender, in front of the driver side front tire. You remove the inner fender liner to access.
It is inside the driver side fender. You need to remove the fender liner to access.
That is the PCM on the driver's side fender.That is the PCM on the driver's side fender.
On the rear driver side fender. Remove the tire and the shield.
In front of the driver side tire, you have to remove the inner fender liner.
To remove the driver side fender on a 2000 Pontiac Grand Am, start by disconnecting the battery to ensure safety. Then, remove the screws and bolts securing the fender, which are typically found along the top edge, inside the wheel well, and at the front of the fender. You may need to remove the wheel and inner fender liner for easier access. Finally, gently pull the fender away from the body, taking care not to damage any attached components.
If it is like my 98, you need to jack up the driver side front wheel and remove the wheel. There is a plate in the fender well that needs to be removed and then you can get at the battery which sits in a tray in the front fender in front of the driver's side front tire.
driver side front fenderwell. Remove the wheel and tire and remove the inner fender