Look here!
http://www.diynetwork.com/diy/shows_wkm/episode/0,2046,DIY_14348_45865,00.html
how to remove a power steering gear box for a 1990 ford ranger 2.9
fahk jeew
You can remove the steering will, on your Ford Ranger pickup truck, by removing the steering wheel pin. Remove the wiring harness and the steering wheel will come off.
At the power steering pump. Remove the cap on the pump and check the level.At the power steering pump. Remove the cap on the pump and check the level.
To remove the power steering pump from a 1997 Ford Ranger, first, disconnect the negative battery cable. Then, remove the serpentine belt by loosening the tensioner pulley. Next, disconnect the power steering hoses and the mounting bolts securing the pump to the engine. Finally, lift the pump out of its bracket, and it should come free.
Power steering fluid.
According to the 2005 Ford Ranger owners manual : Motorcraft MERCON automatic transmission fluid is used in the power steering
On a 1995 Ford Ranger : The power steering fluid reservoir is on the drivers side of the engine It is one of the belt driven accessories at the front of the engine
To remove the steering bracket from a 1998 Ford Ranger, start by disconnecting the negative battery terminal to ensure safety. Next, remove the steering column covers and disconnect any electrical connectors. Then, locate and remove the bolts securing the steering bracket to the firewall and the steering column. Finally, carefully detach the bracket from the steering column and remove it from the vehicle.
it doesnt matter! ---------------------------------------------------------------- The 2000 Ford Ranger owners manual shows Motorcraft MERCON automatic transmission fluid is used for your power steering
According to the 1996 Ford Ranger Owner Guide : Yes , Motorcraft MERCON automatic transmission fluid is used as the power steering fluid
screws on the back side of the steering wheel