answersLogoWhite

0

Your best bet is to remove the steering knuckle then take it to your local machine shop as the wheel bearing must be pressed off the hub and the knew one pressed on.

Also a front end alignment shoudl be performed afterwards

Good Luck

Remove the front wheel knuckle

Remove the inner wheel bearing oil seal

Use Bearing Pulling Attachment to press the wheel hub from the wheel knuckle.

Remove the retainer ring from the wheel knuckle.

Use bearing puller attachment to press the wheel bearing out of the wheel knuckle

reverse the removal procedure.

install new inner seal

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

Replace rear hub and bearing 1999 Honda crv?

how hard is it to replace a rear wheel bearing 1999 Honda crv. this crv does not have rear axle's in it. thank you


How do you replace the front wheel bearings on a 1999 Dodge Avenger ES?

Begin by removing the tire and wheel from your 1999 Dodge Adventure. Remove the end of the axle. Remove the wheel bearing retaining nut. Remove the wheel bearing seal and remove the wheel bearing. Reverse the process to install your new wheel bearing.


How to Replace front wheel bearing 1999 beetle?

the library should have a shop manual for this vehicle :)


Change rear wheel bearing 1999 ford escort zx2?

Its easy Pull the wheel off you will see a center nut undo it and pull it off repace


How do you replace a 1999 Ford Escort headlight bulb?

How do you replace a 1999 Ford Escort headlight bulb?"


How do you change rear wheel bearing on 1999 alero?

How do you change rear wheel bearing on 1999 alero?


Why do your 1999 Cougar wheel bearings keep going out every 6K miles?

Incorrect packing of bearing grease or incorrect torque. Also make sure to replace the bearing race, as it may be scored. CORRECT ANSWER- you need to replace the knuckle and the wheel bearing


How do you change a wheel bearing on a 1999 Mercury Cougar?

Remove the tire and wheel from your 1999 Mercury Cougar. Remove the axle end. Remove the wheel bearing retaining nuts. Remove the wheel seal and the wheel bearing. Reverse the process to install your new wheel bearing.


How to replace a wheel bearing assembly on 1999 Chevy blazer?

Check related answers. There are several responses and are quite accurate.


The traction off light and abs light goes off randomly in a 1999 Pontiac Grand Am SE how can it be fixed?

this has to do with the sensor in the wheel bearing, unfortunatly the sensor and wheel bearing are one unit. first you have to find out which wheel bearing it is and then replace it, these can be expensive. I've had to replace both of mine within months of each other. take it to get a diagnostic done they can tell you which bearing it is.hope this helps


How do you replace front wheel bearing assembly on 1999 Chevy Tahoe with 4 wheel drive?

Here is a link to some good instructions. http://reviews.ebay.com/ebaymotors/Chevy-Silverado-4x4-Front-Wheel-Hub-Bearing-Replacement_W0QQugidZ10000000002536494


How do you replace the headlight bulb located on a 1999 Ford Escort SE?

How do you replace a 1999 Ford Escort headlight - could use a picture.