0
What else can I help you with?
When is the correct mileage to change the timing belt on a 2010 dodge avenger 2.4 liter?
The 24L in a 2010 Dodge Avenger has a timing chain, not a belt. The timing chain should last the life of the car.
How do you change a timing belt on a 1998 dodge stratus 24l 4-cylinder 16valve dohc?
http://www.autofixworld.com/index.php?option=com_content&task=view&id=379&Itemid=84
What is the absolute value of l-24l plus l15l?
39
What year is Johnson boat motor RDS-24L?
Johnson outboards, model RDS-24L, would be a 1962 year model, 40 hp. the boat motor is a 50 hp.
How many 1500ml buckets are needed to fill a 24l can?
Well, isn't that a happy little question! To figure this out, we need to know how many milliliters are in a liter. Since there are 1000ml in a liter, a 24l can would be 24,000ml. If we divide 24,000ml by 1500ml, we find that you would need 16 buckets to fill a 24l can. Happy painting!
Where is the oil drain plug located on a 1996 Pontiac grand am 24L?
On the oil pan.
What is the spark plug gap for a 95 Nissan 240sx with a 24L engine?
0.39-0.43 inches
How do you wire a starter on a 1999 Chevy cavalier 24L?
I'm assuming you mean "hotwire"? Don't try it. You will fry the computer.
How many 1500 mL buckets are needed to fill a 24 L can?
24L/1500mL = 24/1.5 = 16 buckets.
Do you have to pull the motor to replace the oil pan gasket on a 95 4x4 Manual 24L Hardbody?
I have not pulled an oil pan on the model, however, most oil pans can be removed by removing the motor mount bolts and raising the engine up rather than pulling it, which is much less work.
Where is starter located on 2001 Cavalier 24L?
Open the hood and look straight down on the front of the motor. It is in front of the motor by the fan.
How do you replace the water pump on a 1998 Chevy Cavalier 24L?
I would recommend buying both Haynes and Chiltons books and a garage to store it in for about 3-4 days to do the job yourself. An extra hand or two will be quite helpful. By the way , be careful of the timing chain tensioner, yo will need to replace it and all gaskets, might as well change the chain if you have an extra buck. The individual who answered forgot to inform you that you need to change the chain guides and be extra careful while installing the water pump and be sure the gaskets are in place, especially the one that's on the engine block side, because that's one that usually slips and you will end up with a leak. And guess what? You get to do the whole procedure again, including removing the intake again! To correct the leak problem. You don't need to replace the timing gasket. Just clean it with some lite soap and water as long as theres no tears in it. Its made up from Kavlar and for future referance so is the transmission gasket.
