0
Roll the window down and disconect the negative battery post:
1. Remove the inside door panel by first removing the screws under the door handle, and at the base of the panel.
2. Next pop off the cover around the handle.
3. Next pry the door panel off with a pry tool starting at the bottom of the door and working your way up.
4. Once the panel is loose, lift it straight up to release it from the top catches of the window "sill". Don't force section by the mirror push down to release tab.
5. Remove the speaker and disconnect the wire plug connecting it.
6. Locate and disconnect the plug for the power mirror behind the speaker cavity.
7. There are three bolts behind the mirror assembly. One is located through a rectangular opening (also used as an upper retainer catch for the door panel). The other two are behind a sticky insulation pad below the rectangular hole. Once the bolts are removed, the mirror assembly can be pulled out.
8. When reattaching the wire fitting for electric mirror be sure you attach or tape the wire away from the window and test that it does not impede the window up and down movement.
9. Reattach panel in reverse order that you removed it.
Check the link on the right for a detailed descrition with photo's
What else can I help you with?
How do you replace Brakes and Rotors on a 1991 through 1994 Ford Explorer all models?
This link has photos and steps to replace brake pads and rotors. http://www.explorerforum.com/forums/showthread.php?t=122696
Did all BMW X5 models come with heated mirrors?
Probably all models sold in the US do.
What is the R134a capacity or specifications on a 2000 Ford Explorer 4.0?
According to my Haynes repair manual, 1997 through 2000 Ford Explorer models: have a R-134a capacity of 22 ounces
Which company sells the best and cheapest convex mirrors?
One of the most popular manufacturers of convex mirrors is Securikey. They manufacture a large range of mirrors which includes models designed for the smaller budget.
Ford Explorer cam sensor?
The cam sensor is located on the top of the engine where older models had a distributor installed. The sensor needs a special tool to be able to remove and replace it.
Where is the thermostat and how do you replace it on a 1991 through 2007 Ford Explorer all models?
where is the thermostat and how do you replace it on a 1997 ford explorer? I don't know why this is listed as an answer. Its in the front top of the engine. in the middle, underneath that plastic cover that says SOHC. You'll probably need a universal joint on your extention to remove the 3 bolts holding it in place. (10 mm) One of the big hoses from the radiator connects directly to the plastic housing that surrounds it. Can't miss it.
Will a 1997 explorer 4.0 fit in a 1995 4.0 explorer?
I'm not a mechanic / technician but I don't think so From what I have read there are ( 3 ) different engine blocks for the Ford 4.0 liter OHV / pushrod style V6 engine used in a Ford Explorer ( 1991 to 1994 models ) ( 1995 and 1996 models ) ( 1997 to 2000 models )
Can a 1997 Ford Explorer transmission work for a 1993 Ford Explorer?
Starting with the 1995 models of the Ford Explorer the automatic transmissions were ELECTRONICALLY CONTROLLED ( so , the answer would be NO )
How do you replace the odometer cable in your 1997 ford explorer?
According to my Haynes repair manual, 1996 and later models do not use a conventional speedometer cable. They use an electronic speedometer and a vehicle speed sensor (VSS)
Can you put a 95 explorer transmission in a 99 explorer?
According to motorcraft . com , the automatic transmission in a 1995 Ford Explorer only is used on the 1995 and 1996 models , so no
Where is the fuel pump on a 1998 Ford Explorer all models?
In the fuel tank
Are 1997 third row seats compatible with a 2000 ford explorer?
I would say ( no ) In a Ford Explorer , the 2002 and newer models had a third row seat available . Earlier models were not designed to have a third row seat
