First thing you have to do is remove the spare tire. Then remove the few bolts that are holding the housing in place. Replace in reverse of taking it off.
Replace it.Replace it.
To replace the bulb in the side mirror of a 2002 Ford Expedition, first, remove the mirror housing by gently prying it off or unscrewing it, depending on the design. Once the housing is off, locate the bulb socket, twist it counterclockwise to remove it, and then pull out the old bulb. Insert the new bulb into the socket, reattach it by twisting clockwise, and then snap or screw the mirror housing back into place. Always ensure the vehicle is turned off before starting the replacement.
part of the fuel pump housing,replace complete fuel pump housing
You don't!
How do your remove the lamp housing from a 2002 silverado driving lights? I can remove the upper head light housing but I can't get the driving light housing out.
The cabin filter on a 2002 Ford Expedition Eddie Bauer is located behind the glove compartment. To access it, you'll need to remove the glove compartment by detaching the stops and lowering it down. Once it's out of the way, you can find the cabin filter housing, which can be opened to replace the filter.
Just the thermostat and the gasket.
To replace the thermostat on a 2002 Nissan Altima first drain out the coolant. Then proceed the to locate the thermostat housing which is by the engine compartment fuse box. Unbolt the housing and replace the thermostat.
i have a 1998 trooper and i had to get a robe #2 screw driver and take off the outer housing of the socket and replace bulb and replace outer housing, be sure you put on gasketcorrectly or water will get into it.
Get ready to pay over $3000.00 maybe more...
The thermostat is located in the housing where the top radiator hose connects to the engine. You will have to disconnect the hose and unbolt the housing to get to the thermostat.
Air Cleaner (Element) Removal & Installation1. Disconnect the negative battery cable. 2. Remove the outlet tube clamp from around the air cleaner element housing and remove the tube from the air cleaner housing. Position the tube out of the way. 3. Remove the air cleaner element from the air cleaner housing. 4. Installation is the reverse of removal.