Depending on what type of central locking you have there a two mwethods and by reseting I gather you mean reprogramming the fobs to the cars locking system.
First you need to ascertain if you have IR (Infra Red) or RF (Radio) Central locking, the R plate came with both.
IR cars have little square black windows on the exterior door handles at the front.
RF cars dont, but the cool thing about RF equipped cars is that a 3 button key from a newer Ford will open the boot/trunk remotly too!
Anyway to reprogram IR keys do this:
Put the key into the ignition and turn to position I. After 10 seconds the red alarm LED should illuminate. As soon as it does remove the key from the ignition - the LED should remain lit. Open the drivers window. Point the remote key at the front door sensor and press the rear button until the light on the transmitter illuminates, keep the button pressed until it does! With the rear button held in press the front button 4 times then release both at the same time. The control lights in both the clock and fob will flash 4 times to indicate sucseful programming. Turn the ignition back on to exit programming mode
To reprogram RF keys do this:
Insert the ignition key and turn from position II to position 0 and back four times within three seconds. Remove the ignition key. During the next 20 seconds press one of the transmitter buttons on each key you wish to program. The warning system LED wil flash to confirm programming. You have to code each and every key each time you do this.
I used this method for my P reg mondeo (IR) but used position 11 not pos 1 and it worked a treat!
how do you reset remote central locking peugeot partner
how do you reset code for remote central locking on renault megane scenic v reg
you have to open the glove box part and there will be an remote take that remote central and take to a scrap yard and ask them for another one and change it.
To reset the remote central locking on a Citroën Saxo, first, ensure that you are inside the car with all doors closed. Insert the key into the ignition and turn it to the "On" position without starting the engine. Press and hold the unlock button on the remote for about 10 seconds, then release it. Finally, test the remote by pressing the lock and unlock buttons to see if the central locking system is functioning properly.
To reset the remote central locking for a Mercedes S-Class, first, ensure all doors are closed. Insert the key into the ignition and turn it to the "On" position without starting the engine. Press and hold the lock button on the remote for a few seconds, then release it. Finally, turn the ignition off and test the remote to verify the reset was successful.
turn key to position 2 about 5 times you will here central locking click when it clicks press your remote any button that's it re-programed
See answer for this question regarding 2001 model it the same !
To reset the remote central locking on a Skoda Octavia, start by sitting in the vehicle with all doors closed. Insert the key into the ignition and turn it to the "On" position without starting the engine. Press and hold the unlock button on the remote for about 10 seconds while turning the ignition off, then release the button. This should reset the remote; test it to ensure it works properly.
To reset the central locking remote on a Daewoo Nubira, begin by inserting the key into the ignition and turning it to the "On" position without starting the engine. Then, press and hold the unlock button on the remote for about 10 seconds. After releasing the button, turn the ignition off and test the remote to see if it has been reset successfully. If it doesn’t work, you may need to consult the owner's manual or a professional for further assistance.
pull the fuse out for central locking wait 2 minutes then put back in (fuse box under glove compartment ) hand book will say which fuse then reprogamme remote
To reset the remote central locking on a 2001 Vauxhall Astra, first, ensure all doors are closed. Insert the key into the ignition and turn it to the "On" position without starting the engine. Press and hold the unlock button on the remote for about 10 seconds, then release it. Finally, turn the ignition off and test the remote to see if it’s functioning properly.
To reset the remote central locking on a Seat Altea, start by sitting in the driver's seat with all doors closed. Insert the key into the ignition and turn it to the "On" position without starting the engine. Press and hold the unlock button on the remote for about 10 seconds, then release it. Finally, turn the ignition off and test the remote to ensure it is functioning properly.