Call a mechanic
To set the clock on a 1999 Eddie Bauer Ford Explorer, first turn the ignition to the "On" position without starting the engine. Press the "Clock" button on the radio or the dashboard, which will allow the hour display to blink. Use the "Tune" or "Seek" buttons to adjust the hour, then press the "Clock" button again to set the minutes, adjusting them in the same way. Once done, press the "Clock" button again to save the time.
Check your owners manual. If you don't have one copy & paste this link. http://www.genuineservice.com/genuineservice/en/gloveboxresults
According to my Chilton repair manual there is a 20 amp fuse in your fusebox (under your dash on driver's side) that is for your horns. The Chilton book has the fuse being in location # 2. That's a place to start.
on my 95' explorer if you turn the radio off you can get the clock. also there is usually a button you press for "display" or says "clock".
What is the value of "The American Eagle Clock" 200th Anniversary, Limited Edition N0: A17297
What is the value of "The American Eagle Clock" 200th Anniversary, Limited Edition N0: A17297
You can get the XMReady or the Crosley Explorer satellite alarm clock radio.
You have to manually test the inputs and outputs of the clockspring with an ohm meter. But if you have lost your horn, cruise, and your airbag light is flashing a code 32 (three flashes, short pause, then two flashes, long pause, and repeat), then you can pretty much bet the clockspring is bad.
125-155
$6275.97
The clock spring is located inside the steering wheel behind the airbag.
Turn the radio on / press and hold the CLK button / press the right side of the "SEEK" button to increase the hours or press the left side of the "SEEK' button to decrease the hours / press the right side of the "TUNE" or "TUNE DISCS" button to increase the minutes, or press the left side of the "TUNE" or "TUNE DISCS" button to decrease the minutes When the time is set - release the "CLK" button If this doesn't work.....sry