Use a timing light
How do u set the timing on a 1972 buick skylark
the cam gear slot is set at 6:00 and the crank gear slot is at 12:00.
To set the timing marks on the timing gears of a 1969 Dodge Dart with a 225 Slant Six engine, first ensure the engine is at top dead center (TDC) on the compression stroke for cylinder one. Align the timing mark on the crankshaft gear with the mark on the timing cover, and then align the camshaft gear's mark with the corresponding mark on the timing chain or cover. This ensures that both the crankshaft and camshaft are properly synced for optimal engine performance. After aligning, double-check the marks before reassembling any components.
timing marks dodge 2.2 engine how to set them
The timing on a 1989 Dodge truck should be set to 10* after unplugging the temperature sensor.
where are the timing marks on a 94 2.5 dodge shadow es
Ebay, local newspaper, etc
The timing marks on a '97 Dodge Stratus are located on the timing chain and the camshaft sprocket. They must be aligned to set the initial timing.
Timing is controlled by the PCM. There is no user adjustment.
It is set to 0 deg. with a scan tool. It can not be done with a timing light.
The timing on a 1997 Dodge Ram is not set with a timing light. The distributor rotor is lined up with the mark on the pick up plate when the engine is at tdc to set base timing. The timing is then fine tuned with a scan tool. The scan tool is used to set it exactly to 0 degrees.
get the pullys lined up at the timing marks