you need a especial tool
The Ford 4.6 litre V8 has ( 1 ) timing CHAIN to each cylinder head ( so there are 2 timing CHAINS ) I'm not a mechanic / technician but there is no set mileage to change the timing CHAINS as far as I know
5133146526
timing should be set at 10 degrees BTDC. be sure you unplug the spout connector before you adjust the timing.
I believe that is 10 degrees BTDC
The timing marks for a 2002 Ford Explorer are located on the timing chain and cam shaft sprocket. They must be aligned with each other to set the initial timing.
how do you set or check the timing on a 99 ford expedition?
where to set timing for a 1988 ford ranger 2.2l
The timing is set by timing marks on the crankshaft pulley. Using a timing light the light will sync with the engine and show if the marks line up properly. To adjust the timing the distributor is turned slightly. There is a clam and bolt under the distributor, loosen these just a bit to be able to move the distributor.
mk3 fiestas dont have a timing belt it is done by a chain tis chain will probably outlast the engine however if the timing is lost the chain is lose and is a big job to change it best looking for new engine it will be easier to change engines wja
There is not any set time as they very seldom go bad.
how do you set the timing belt on a 1997 ford contour 2.0 4cy
Timing chain diagram or how to set it