0
I believe that under the hood in front of radiator there is a label with this info. I have a 1994 s10 Blazer and I am going to sell it and I need some heLIp in setting a price for it. It Is in excellent condition and the motor was new, (not rebuilt) about eighty thousand miles ago
What else can I help you with?
How how to set the timing on a 2000 Chevy Blazer?
How do you set the timing on a 2000 Chevy blazer (V6)
Set timing 2002 blazer EDI distributor?
how do you set the timing on a distriubtor for a 2002 Chevy blazer
How do you set timing on a 1988 Chevy blazer s10 v6?
I have a 1987 Chevy Blazer S 10 4X4 2.8l V6 and the timing recommendation is 10 degrees.
How do you set the timing on a 99 Chevy s10 blazer?
There is no timing to set. The timing is controlled by the ECM with signals it receives from various sensors.
What does timing set on 1987 Chevy blazer 4x4 2.8 V6?
I have a 1987 Chevy Blazer S 10 4X4 2.8l V6 and the timing recommendation is 10 degrees.
How do you set timing on a 1994 Chevy Blazer 1500 5.7 L. 4x4?
To set the timing on a 1994 Chevy Blazer 1500 5.7L 4x4, first, ensure the engine is at operating temperature and then turn off the engine. Disconnect the timing connector (usually a single-wire connector near the distributor) to disable the computer's control over timing. Use a timing light to check the timing mark on the harmonic balancer, adjusting the distributor as needed to align it with the specified timing mark, which is typically 0 degrees BTDC for this engine. Finally, reconnect the timing connector and re-check the timing if necessary.
Where is the wire that you unplug to set timing on a 1994 Chevrolet truck?
I just set my timing and the plug on my 1994 full size Chevy Blazer (same as a full size pick up) was directly under the glove compartment. It was one wire (tan with black stripe) and two ends of a plug together just unplug and set timing.
When do you change the timing chain on 2003 Chevy blazer?
When it go's out and the engine quits are when you can no longer set the timing with an engine scanner.
How do you set timing on a 2000 Chevy blazer s10 v6 vortec?
On the Vortec the computer does it all.
How do you set the timing on a 1993 full size Chevrolet blazer four wheel drive with 350 engine?
how do you set the timing on a 1993 Chevy pick up
How do you set the timing on a 1994 Chevy 350 5.7L?
The timing is electronic controlled. You MUST have an OBDII engine scanner to set the timing to specs. Timing light will not work.
Where do you aim the timing light on the 2002 Chevy blazer?
You CANNOT use a timing light on that engine. ( won't work ) It requires an OBDII engine scanner to set the timing. The timing is computer controlled.
