0
What else can I help you with?
Water pump 1991 oldsmobile Calais?
JC Whitney and Parts Geek both carry the water pump for a 1991 Oldsmobile Calais.
Where is the oil pan located on a 86 Oldsmobile Calais?
The oil pan on a 1986 Oldsmobile Calais is located at the bottom of the engine, beneath the crankshaft. It serves as a reservoir for the engine oil and is typically positioned directly above the transmission. To access it, you may need to raise the vehicle and remove any components obstructing it, such as the exhaust or crossmember.
Why won't 1990 Oldsmobile Calais go when put into gear?
If a 1990 Oldsmobile Calais won't go when put into gear, it could be due to several issues. Common problems include low transmission fluid, a malfunctioning transmission, or a failed torque converter. Additionally, issues with the gear linkage or a faulty clutch (if it's a manual transmission) could prevent engagement. It's advisable to check the fluid levels and consult a mechanic for a thorough diagnosis.
What motors interchange with 1988 Oldsmobile calais 2.3?
The Oldsmobile Calais, also known as the Cutlass Calais, was produced by General Motors from 1985 to 1991. In 1987, the Quad 4 engine was developed and the 1988 Calais was fitted with it. All?æof the Quad 4 14 engine types of the 2.3 liter version are interchangeable on the 1988 Calais.
Were can you find a oil pump for a 1988 Oldsmobile cutlass calais 2.5L car?
i need an oil pump fro a 1988 oldsmobile cutlass calais where can i buy one? sherryparris@gmail.com
What is the size of a transmission on a 86 Oldsmobile cutlass?
If it's a Cutlass Supreme (RWD), 4 speed is a TH-200r4. 3 speed is a TH-250. Not sure about the FWD cars (Calais, Cierra).
Where is quad driver located at on Oldsmobile Cutlass Calais S 2.3?
In the computer.
How can I get a fuse diagram for 1986 Oldsmobile Calais?
You can find that information in the owners manual.
What are the cylinder head torque specs on a Oldsmobile 3.1 liter?
what are the head tourque specs for a 1986 Oldsmobile calais 2.5 liter ?
How do you replace a 1990 Oldsmobile Calais starter?
To replace the starter on a 1990 Oldsmobile Calais, first disconnect the negative battery cable for safety. Then, locate the starter beneath the vehicle, usually near the transmission. Remove the mounting bolts and electrical connections from the old starter, then install the new starter by reversing the process. Finally, reconnect the battery and test the new starter to ensure it’s functioning properly.
1987 Oldsmobile cutlass calais Cruise Control Stopped working suddenly on highway. how would i fix this fuses are good brake lights are working.?
if it is a standard transmission, check the clutch switch on the pedal, may fix the problem. it did on my accord. i own a calais w/o cruise. hope you find the problem.
Where is the crank posistion sesnor located on a 1991 Oldsmobile 2.5 liter cutlass calais?
On a 1991 Oldsmobile Cutlass Calais with a 2.5-liter engine, the crankshaft position sensor is typically located near the bottom of the engine, often mounted on the engine block or transmission bell housing. It is positioned close to the crankshaft to accurately monitor its position. You may need to access it from underneath the vehicle for better visibility and reach.
