0
Most times you can wiggle the shifter to trick the neutral switch into working. I would look closely at the starter solenoid it may be going out.
Make sure that it has petrol in it. If the engine turns over just fine,and only not start,it is not the starter solenoid or the neutral safety switch or the battery. First check to make sure that you can hear the fuel pump running when you first turn on the key. If no sound,check the fuses to the fuel pump and ECM. Check BOTH fuse blocks,side of dash and under hood. I would be thinking fuel or fire. The easyer of the two is check fire.Take the coil cover off top of engine,hold the coil outlet pens close to intake cam housing,have someone turn the key.If you see sparkes it is getting fire.If no sparks it will PROBABLY be the ICM (Ignition Control Module) Its pluged into that top cover you just took off. BUT,If you have fire,NOW you have to check fuel pump fuses.On these 2.4 DOHC engines,they don't have a good way of checking fule pressure so what I did was to make a tool to fit where the fuel filter is.I remove the filter insert my homade rig with a guage on it and turn it on. Key on,engine not running..41 to 47psi..engine idling W/pressure regulator vaccumm hose connected...31 to 44 psi and with vacuum hose disconnected..42 to 50 psi ,, injector resistance 11 to 13 ohms AND IT COULD BE DEFECTIVE CRANKSHAFT SENSOR. There are a couple other things it COULD be but check these thing first...Good luck www.autozone .com has repair manules online,check it out.It might be what you could use.
Try putting it in neutral and try.
What else can I help you with?
Where is the neutral safety switch on a 1993 Chevy cavalier?
The neutral safety switch, on your 1993 Chevy Cavalier, is located beneath the shifting column. The switch can be accessed by removing the shifting boot.
How do you replace a neutral safety switch 2002 cavalier?
Begin by removing the wiring from the 2002 Chevy Cavalier neutral safety switch. Remove the neutral safety switch retaining screws. Reverse the process to install your new neutral safety switch.
Where is the neutral safety switch on a 1996 Chevy cavalier?
it is under the dash at the top of the clutch pedal.it is the same as the clutch start switch
How do you change the neutral safety switch on a 2003 Chevy Malibu?
how do you check the safety neutral switch on a 2003 Chevy Malibu
Neutral safety switch on a 1999 Chevy Tahoe how to change it?
The neutral safety switch, on your 1999 Chevy Tahoe, simply plugs in. Unplug the neutral safety switch and replace it with a new one.
Where is the neutral safety switch on a 2003 Chevy Trailblazer?
Where is the neutral safety switch on a 2003 trailblazer?
How do you bypass a neutral safety switch on a 2004 Chevy silverado 1500?
How do u bypass the neutral safety switch in a 2002 chevy silverado 1500
How do you bypass Neutral Safety Switch on Chevy cavalier?
Bypassing the neutral safety switch on a Chevy Cavalier is not recommended due to safety concerns, as this switch is designed to prevent the vehicle from starting in gear. However, if you need to do this for diagnostic purposes, you can locate the switch on the transmission, disconnect the connector, and use a jumper wire to connect the terminals. Remember to take necessary precautions and consider repairing or replacing the switch instead, as disabling safety features can lead to accidents. Always consult a professional mechanic if you're unsure.
Where is clutch switch on a Chevy Tracker automatic?
If it is an automatic it will not have a clutch safety switch it will have a neutral safety switch
Where is the neutral safety switch for a 91 Chevy Camero?
the neutral safety switch is in the center consol conected to the shifter (a/t's) only
Where is neutral safety switch on 1979 Chevy truck?
in the transmission
Where is the neutral safety switch on a 1995 Chevy van?
The 1995 Chevrolet Van neutral safety switch can be located on the top of the transmission. The switch will be just below the shifter.
