they are two separate fuses. so two separate chimes. look at your fuse box.
To disable the seatbelt warning on a 2006 Buick Lucerne, you can follow these steps: Start the vehicle and buckle the driver’s seatbelt. Then, turn the ignition off and back on without starting the engine. Finally, unbuckle the seatbelt and buckle it again three times, and then turn off the ignition. This process may vary slightly, so consult your owner’s manual for specific instructions if needed.
There is no chime for the headlights or key in the ignition with the door open
There isn't a separate fuse. The warning comes out of the cluster and can not be turned of.
You can turn off the 2009 Toyota Camry seatbelt warning light by engaging the seatbelt. You can also remove the seatbelt warning light fuse. Removing the seatbelt warning light fuse is not recommended.
To turn off the seatbelt warning light on a Citroën C1, you typically need to buckle the seatbelt. If you want to disable the warning sound, you can do so by following the vehicle's manual instructions, usually involving a specific sequence of actions with the ignition and seatbelt. However, keep in mind that disabling safety features is not recommended for safety reasons. Always ensure that all passengers are buckled in for safe driving.
check the door switch
You can turn off the seatbelt warning light in your 2006 Ford Explorer, by buckling the seatbelts. When the seat is occupied the warning light will stay on until the seatbelt is buckled.
Wear your seatbelt!
Wear the seatbelt!!
Usually it is a warning that either you have left your keys in the ignition, or you have left your headlights, interior, or parking lights on. Sometimes, though, the little switch in the ignition that senses the presence of the key, will stick. Reinserting the key and jiggling it around a bit while removing it will often fix it.
plug the seatbelt in.. the warning stops then ;-)
Put on the seat belt.