You need to start by having it checked for codes. Then you will know what to diagnose/fix.
There are pages and pages of things that can cause a check engine light. You need to have it checked with a scantool. Then the code can be diagnosed and repaired.
There are pages and pages of things that can cause a check engine light. You need to have it checked with a scantool. Then the code can be diagnosed and repaired.
There are pages and pages of things that can cause a check engine light. You need to have it checked with a scantool. Then the code can be diagnosed and repaired.
Check the engine coolant... Is it full? yes coolant level is full
is the computer setting a code or check engine light, if not it could be your crank sensor.
It might cause the "check engine" light to come on.
Try disconnecting battery for about 10 mins. or have vehicle scanned and codes cleared
after the cause of the code is repaired, you reset with a scan tool, or by unhooking the battery.
How to reset service light on a 2004 grand am
There are pages and pages and items that can cause a check engine light. You need to have it checked for codes with a scan tool. After repair light can be shut off with scan tool.
Disconnect and reconnect the ground cable from the battery or remove and replace the fuse that controls your computer.
To replace the check engine light bulb in a 2001 Pontiac Grand Prix, first, disconnect the negative battery terminal to ensure safety. Next, carefully remove the instrument cluster by unscrewing the necessary screws and gently pulling it out. Locate the check engine light bulb socket on the back of the cluster, twist it counterclockwise to remove, and then replace the bulb. Finally, reassemble the cluster and reconnect the battery.