Ignition coil pack on a 2002 z24 cavalier?

Answer 1

its the shield on top of the motor,take the 4 bolts out of it and be careful removing it around the metal hoses,undo the wire harness on the right side,it might take a lil wiggling to get the boots to detach from the spark plugs,when you get the shield off flip it over and remove the housing by removing the 4 screws and slightly lifting up so you can get to the wire harnes under it,when you get the wire harness removed flip the housing over and there should be 2 coilpacks,be careful removing them cause they hook up to nipples underneath and there are rubberbands around that are hell trying to put back on.nut if your replacing them be sure to check to make sure it just ain't your housing that is grounding out to your motor,check for black lightning patterns around the housing(where the housing has a hole in it it will ground out to your motor),usually a good epoxy that takes high heat will fix it and you wont have to spend as much money,hope this all helps if not reach me at derek420evett@gmail.com