0
In a 1991 Oldsmobile Silhouette van how would you access subsequently replace the blower motor resistor?
I have a 1999 van. The heater motor needs to be removed. It is located in front of the passenger side, 3 brass bolts screw in vertically. With motor removed you can disconnect the wiring to the motor. Follow the wiring the other way and you will find the resistor, also held in with small brass screws. For mine, it was not necessary to completely remove them, just unscrew about 3/8 inch, then the resistor can drop down and slide out. Y
You are better off kneeling on some padding outside the passenger door with a light and some small sockets
What else can I help you with?
How do you replace the fuel filter on a 1999 Oldsmobile silhouette?
replace a fuel filter on a 1999 Oldsmobile Silhouette
How do you replace the headlight in a 2003 Oldsmobile Silhouette?
how do i replace the drivers side headlight in a 2003 oldsmobile silhoutte
How do you replace a leaky heater hose in your silhouette?
How to replace a heater hose on a 2001 Oldsmobile silloute
How do you adjust power window tracking on a 99 Oldsmobile silhouette?
you don't you replace it
What happens if your Oldsmobile silhouette has the lower intake crack?
replace lower intake
How do you replace a power steering pump on 2001 Oldsmobile Silhouette?
a wrench and a 12 pack
What does it cost to replace head gaskets on 1997 Oldsmobile Silhouette?
I have a 2002 Olds Silhouette and had to replace the head gasket set 2 years ago. It raun around $1,700.00
How do you replace a rack and pinion assembly on a 1997 Oldsmobile Silhouette?
Gm had a recall on this. Take it to a dealer to do it for free.
How do you replace the windshield wiper motor on a 1999 Oldsmobile Silhouette?
One bolt at a time-cute but not helpful
How to replace blower resistor in 2002 olds intrigue?
A blower resistor can be replaced, in your 2002 Oldsmobile, by removing the resistor wiring. Remove the retaining screws. Reverse the process to install the new resistor.
What is the cost to replace intake manifold gasket on 1998 Oldsmobile silhouette?
It cost us about $700 cnd. That was a shop that charged about $75/hr.
Will bars intake manifold stop leak work on Oldsmobile Silhouette 3.4 engine?
You need to replace the manifold and use Felpro Gaskets.
