If you look at the connector on the plug end you will see some letters stamped on the side of the connector. Find the letters A and C. Now make up a short jumper wire with ends on it that will fit tight over the A and C pins inside of the connector and hook those two together where it won't fall out. tape it all up and your done.
That 4 wire connector is for the electronic spark controll timing. But you don't need it on that engine. Have a good day.
Clockwise on all stock Chevyrolets.
yes, of course
It will not matter what distributor you have as All V8 Chevrolet's firing order is 1,8,4,3,6,5,7,2. 1,3,5,7 is on the left bank and 2,4,6,8 is on the right bank. The distributor turns clockwise
06 impala ss, stock to stock.
A stock 1984 Chevrolet 350 small block V8 engine has 160 horsepower. The output can be increased by installing a free flowing exhaust system, high performance cam, or electronic fuel injection.
3.736"
18436572. If you have a stock intake manifold, it should be written on the front of it.
P245/75 R16 Chevy stock size
It has no stock symbol. It is a part of General Motors, so would be included in GM.
Yes you can no problem.
I really depends on what distributor you have on the engine. It could be a mechanical advance distributor or a vacuum advance distributor (stock). Google "the Somba" Volkswagen forum and all will be explained.
P195 r15