answersLogoWhite

0

egr passage way in engine plugged with carbon. will off of engine, make sure egr is ok.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

Egr insufficent flow?

2001 ford windstar has code PO401 erg insufficent flow.


Code po 401 on 1998 buick regal 3.8 liter?

I had the same thing happen to my car that code means insufficent egr flow. You have to replace the egr valve.


When do you change an egr valve on a 2005 Chevy Malibu?

Whenever it fails.


Where is a egr pressure sensor located on a 1999 Malibu?

Where is located pressure sensor on Chevy Malibu 1999


Can you bypass Egr valve on a 2000 Chevy Malibu 3100?

no the egr valve has a big effect on the engine,it is controlled by the pcm.


What does p0405 means on a Chevy Malibu ls?

po405---egr flow sensor low input-- this basicly means that the egr or connections to it need attention. remove and clean egr to get carbon build up out of it. also make sure it is clean at motor side where it mounts to engine, if no carbon replace egr valve.


Where is the EGR valve pressure sensor on a 1999 Chevy Malibu 3.1L 6cyl engine?

Is it built in to the egr next to the brake fluid reservoir?


What does the diagnostic trouble code p0401 mean on a 1999 Chevrolet Malibu?

Trouble code P0401 means: Insufficient EGR Flow Detected Replace the EGR valve


What is code p0401 for 2004 Chevy Impala?

P0401 = Insufficient EGR Flow


Where is the egr valve located on an a 1999 Chevy Malibu 3.1l v-6?

Driver side on top of intake by firewall.


What is Diagnostic trouble code p1404 for 2001 Chevy Malibu?

Code p1404 is an EGR position sensor error. This can be caused by a bad EGR valve or computer software update.- TechJK ------------


How do you change the EGR Valve on a Chevy Malibu?

To change the EGR valve on a Chevy Malibu, first, ensure the engine is cool and disconnect the battery. Remove the EGR valve by unscrewing the bolts that secure it and detaching any electrical connectors and vacuum hoses. Clean the mounting surface on the engine, install the new EGR valve, and reconnect any hoses and electrical connectors before securing it with the bolts. Finally, reconnect the battery and start the engine to check for proper operation.