Cable
If you have a electrical speedo you don't have a cable. Change the speed sensor in the trans.
That is the electrical switch that is bolted to the driver's side of the transmission where your shift cable hooks to it.
what should be the distance between instrument cable and electrical cable
Most industrialised countries manufacture electrical cable.
To remove the starter from a 2007 Chevy Cobalt, first, disconnect the negative battery cable to prevent any electrical short. Then, lift the vehicle and support it securely. Remove the starter's electrical connections, including the battery cable and the smaller wire, and then unbolt the starter from its mounting bracket. Finally, carefully pull the starter out of the engine compartment.
cable tv
To replace the alternator on a 2004 Chevy Malibu, first disconnect the negative battery cable to prevent electrical shock. Remove the serpentine belt by loosening the tensioner, then unbolt the alternator from its mounting bracket. Disconnect the electrical connectors and power wire from the alternator, and then install the new alternator by reversing the steps. Reattach the serpentine belt and reconnect the battery cable once everything is secured.
To install a starter on a 2006 Chevy Cobalt LT, first disconnect the negative battery cable to ensure safety. Remove the starter's electrical connections and bolts securing it to the engine. After taking out the old starter, position the new starter in place, secure it with bolts, and reconnect the electrical connections. Finally, reconnect the battery cable and test the starter to ensure proper operation.
Electronic, no cable.
its electronic, there is no cable
He prefers horses.
A device designed to permit the entry of a cable into an electrical equipment and which provides sealing and retension. Cable well tightened with supporting of cable holding material into an electrical equipment or panels.