0
What else can I help you with?
Do you need to drop the engine to replace the head gaskets on a 1992 G20?
No, they can be replaced with the engine in the vehicle, but it is not an easy repair.
1995 Buick Regal V6 3.1 engine how do you repair the head gaskets?
well you dont repair the gasket itself you just replace them.
Should you replace head gaskets during intake gasket repair?
No reason to if the intake gasket is the only problem you have. If engine was running smooth and was not overheated then there is no reason to fool with the HEAD gaskets
What can cause a cadillac oil leak?
old gaskets, replace asap or risk losing your engine or transmission or some other catastrophic repair
How do you repair blown head gaskets?
You cannot repair a blown head gasket, you must remove the heads and replace the gasket.
Is there any way to clear antifreeze from top of pistons without disassembling engine when cylinder head gaskets leak?
Remove spark plugs and crank engine to blow coolant out. Put plugs back in and start engine. Pull inside garage to repair, or leave radiator cap loose and take to mechanic to replace gaskets if engine is not overheating too quickly to get it there.
How do you replace intake manifold gaskets 1997 z34 Monte Carlo?
i suggest you get a repair book.it is not easy
How to repair head gasket leak?
You should replace the head gasket. This repair is critical to the better performance of the vehicle, and to prevent future damage of the engine.
How do you repair harward pool pump from leaking?
If it is the pump seal - replace the seal and other related gaskets. If it is the pump itself - replace the entire pump.
How do you repair exhaust manifold leak on a autoquest?
To repair an exhaust manifold leak on an Autoquest, first ensure the vehicle is safely elevated and secure. Remove the necessary components to access the exhaust manifold, then inspect it for cracks or damaged gaskets. Replace any faulty gaskets and, if needed, weld or replace the manifold itself. Reassemble all components, ensuring proper torque specifications are followed, and start the engine to check for any remaining leaks.
Do you need to remove engine to do head gaskets on a v6 alfa?
Yes, on many V6 Alfa Romeo engines, removing the engine is often necessary to access and replace the head gaskets. This is due to the engine’s design and tight space constraints, which make it challenging to perform the repair in situ. However, specific models may vary, so it's always best to consult the service manual for the particular engine you are working on.
What happens if engine got hot?
Driving a car with an overheated engine, will cause a build up of pressure that can blow gaskets and cause other internal damage. It's an expensive repair, or may require replacing the engine. Some engines can handle heat better, frequent motor oil changes are recommended for better performance...
