0
What else can I help you with?
Can you drive with a broken ball joint?
No, it is not safe to drive with a broken ball joint. A broken ball joint can cause a loss of steering control, leading to a potential accident. It is important to have it repaired before driving again.
What is the function of the ball joint on a car?
it allows the wheels to swivel so the driver can steer
Can you name the joint at arm?
Ball and socket joint The arm movement is possible because of ball and socket joint.
What are some tricks in removing a separated ball joint?
If you mean a broken ball joint, you may need a cold chisel and hammer or air grinder to remove the steel rivets and a tool called a "pickle fork" to drive between the ball joint and the spindle to separate the ball joint from the spindle taper after removing the cotter pin and nut.
Why does your wheel rattle on your Crown Victoria?
Ball joint. Shake your tire if it wiggles a lot you need a new ball joint. possible you need to tighten your lug nuts
Name a ball and socket joint?
The hip joint is a ball and socket joint.
What does a ball joint do?
The ball joint in a vehicle is used to pivot between the wheel and the suspension. There are usually and upper ball joint and a lower ball joint.
Which joint permit the most possible movement?
The shoulder joint permits the most possible movement due to its ball-and-socket design, allowing for a wide range of motion including flexion, extension, abduction, adduction, rotation, and circumduction.
What is the ball joint special tool?
There all kinds of tools for Ball Joints; OTC Remover, Ball Joint OTC Ball Joint Separator KD Tools Ball Joint Separator OTC Ball Joint Service Set KD Tools Universal Ball Joint Separator OTC Wrench, Ball Joint Spanner KD Tools Ball Joint/U-Joint/Brake Anchor Pin Press OTC Master Ball Joint Adapter Set KD Tools Ball Joint/U-Joint/Brake Anchor Pin Press Set KD Tools Ford Ball Joint Cam Tool Sears.com
What type of synovial joint is the shoulder joint?
The joint in your shoulder is a Ball & Socket Joint.
Why is it possible to swing around the leg in circles at the hip joint but not at the knee joint?
The hip joint is a ball and socket joint so it possible to move the leg around in a 360 degree circle. The knee joint is a pivotal hinge joint so it can only move backwards and forwards with slight rotation.
Purpose of a ball joint in the steering system?
On vehicles, the ball joint(s) connect the steering spindles or struts to the control arms and allow for limited horizontal and vertical movement of the spindles/struts, as well as allow the spindle/strut to turn on a horizontal plane so that the vehicle can steer. ball joints deviate velocity due to up and down motion. The ball and socket joint consist in the hip and shoulder. It is a spherical bone fitted into a cup like bone for maximum movement.
