There is a complete list of supporting mods that should be in place prior to installing that 3.4. Can you get away with less? Possibly. Have people gotten away with less? Yes. Do you want to take the chance? Enough said.
Courtesy of clubgp.com Check out he following website for a discussion of what you can run and what you need to do. http://www.clubgp.com/newforum/tm.asp?m=2867792&p=1&tmode=1&smode=1 Many people have gone down this road before, learn from their mistakes. Hope this helps "G"
No, it is not safe to use electrical outlets with loose plugs as it can increase the risk of electrical shock or fire. It is important to repair or replace the outlet to ensure safety.
the plugs are ok! but they throw them around and they may get broke from shipment. it is better to buy plugs from a auto-parts store unless you trust the store plugs. its your call.
I'm not real sure what you are asking. If the pump has failed but the pulley still spins freely then yes, you can drive it for awhile that way without doing any real harm. If the pulley is completely frozen up but on a separate belt then you can take that belt off and drive it for awhile. Bear in mind though that a vehicle built with power steering needs that assist to be safe. It's not the same as a vehicle built without power steering. So, for awhile you are probably okay but you should get it fixed as soon as you are able to do so.
Yes, assuming that your refrigerator is set at 40°F. or colder.
The amount of weight a pulley can pull depends on the design and material of the pulley. Generally, pulleys are designed to handle the force required for their intended use. It's important to check the weight limit specified by the manufacturer to ensure safe operation.
go under pulley
No, it is not safe to use a loose outlet plug in your home. Loose outlet plugs can pose a fire hazard and increase the risk of electrical shock. It is important to replace or repair loose outlet plugs to ensure safety.
It is not safe to touch the metal parts of plugs because they can carry electric current, and coming into contact with them can result in an electric shock. It is important to unplug the device before handling the plug to prevent any accidents.
You can set most plugs at .030 and be safe.
thers 4 drive safe
A zip line pulley works by using a system of wheels or rollers to reduce friction and allow a rider to move smoothly along the cable. The pulley is attached to a harness or seat which carries the rider along the zip line, while gravity provides the force for propulsion. The design of the pulley ensures a safe and controlled descent along the zip line.
make sure you put the right plug wires to the plugs and you did not mix them up drive safe